ACCULOGIC, INC.
===============

   SIDE-4/ PLUS

   +------------------------------------------------------------+
   |------------------------------------------------------------|
   | Data bus:         | 16-bit, ISA                            |
   |-------------------+----------------------------------------|
   | Size:             | Half-length, full-height card          |
   |-------------------+----------------------------------------|
   | Hard drives       | Two IDE(AT) drives                     |
   | supported:        |                                        |
   |-------------------+----------------------------------------|
   | Floppy drives     | Two 360KB, 720KB, 1.2MB or 1.44MB      |
   | supported:        | drives                                 |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/c/A-B/20008-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                  Function                   |   Location   |
   |---------------------------------------------+--------------|
   | 34-pin control cable connector-floppy drive |      J1      |
   |---------------------------------------------+--------------|
   | 4-pin connector-drive active LED            |      J2      |
   |---------------------------------------------+--------------|
   | 40-pin AT Interface (IDE) connector         |      J3      |
   |---------------------------------------------+--------------|
   | 9-pin serial port 2-internal                |      J4      |
   |---------------------------------------------+--------------|
   | 15-pin game port-internal                   |      J5      |
   |---------------------------------------------+--------------|
   | 9-pin serial port 1-external                |      J6      |
   |---------------------------------------------+--------------|
   | 25-pin parallel port-external               |      J7      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |              Function              | Location |  Setting   |
   |------------------------------------+----------+------------|
   |>> | I/O Channel Ready signal       |   JP4    |    open    |
   |   | disabled                       |          |            |
   |---+--------------------------------+----------+------------|
   |   | I/O Channel Ready signal       |   JP4    |   closed   |
   |   | enabled                        |          |            |
   |---+--------------------------------+----------+------------|
   |>> | Floppy drive enabled           |   JP5    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Floppy drive disabled          |   JP5    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Floppy drive port address is   |   JP6    | pins 1 & 2 |
   |   | 3F0-3F7h                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Floppy drive port address is   |   JP6    | pins 2 & 3 |
   |   | 370-377h                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Single speed floppy drives     |   JP7    | pins 1 & 2 |
   |   | supported                      |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Dual speed floppy drives       |   JP7    | pins 2 & 3 |
   |   | supported                      |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Hard drive enabled             |   JP8    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Hard drive disabled            |   JP8    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | IDE select mode enabled        |   JP9    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Not used                       |   JP9    |    open    |
   |---+--------------------------------+----------+------------|
   |>> | Hard drive port address is     |   JP10   | pins 1 & 2 |
   |   | 1F0-1F7h                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Hard drive port address is     |   JP10   | pins 2 & 3 |
   |   | 170-177h                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Not used                       |   JP11   |    open    |
   |---+--------------------------------+----------+------------|
   |>> | IRQ14 normal                   |   JP12   | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | IRQ14 delayed until ACTIVE-    |   JP12   | pins 2 & 3 |
   |   | signal is removed              |          |   closed   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |         SERIAL &AMP; PARALLEL PORT CONFIGURATIONS          |
   |------------------------------------------------------------|
   |              Function              | Location |  Setting   |
   |------------------------------------+----------+------------|
   |>> | Serial port 1 (CN6) enabled    |   JP13   | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial port 1 (CN6) disabled   |   JP13   | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial port 1 (CN6) set to     |   JP14   | pins 1 & 2 |
   |   | COM1                           |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial port 1 (CN6) set to     |   JP14   | pins 2 & 3 |
   |   | COM3                           |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial port 2 (CN4) enabled    |   JP15   | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial port 2 (CN4) disabled   |   JP15   | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial port 2 (CN4) set to     |   JP16   | pins 1 & 2 |
   |   | COM2                           |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial port 2 (CN4) set to     |   JP16   | pins 2 & 3 |
   |   | COM4                           |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Parallel port (CN7) enabled    |   JP17   | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Parallel port (CN7) disabled   |   JP17   | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Parallel port (CN7) address is |   JP18   | pins 1 & 2 |
   |   | LPT1                           |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Parallel port (CN7) address is |   JP18   | pins 2 & 3 |
   |   | LPT2                           |          |   closed   |
   +------------------------------------------------------------+