ADAPTEC, INC. ============= ACB-2322A (VERSION 2) Data bus: 16-bit, ISA Size: Full-length full-height card Hard drives supported: Two RLL ESDI Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-------------------------------------------+----------------| | 34-pin data cable connector-floppy drive | J1 | |-------------------------------------------+----------------| | 20-pin data cable connector-drive 0 | J2 | |-------------------------------------------+----------------| | 20-pin data cable connector-drive 1 | J3 | |-------------------------------------------+----------------| | 34-pin control cable connector-hard drive | J4 | |-------------------------------------------+----------------| | 4-pin connector-drive active LED | J5 | |-------------------------------------------+----------------| | Serial monitor output | J13 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |--------------------------------+--------------+------------| |>> | BIOS address C800-CBFFh | J11 | pins 1 & 2 | | | | | closed | |---+----------------------------+--------------+------------| | | BIOS address- CC00-CFFFh | J11 | pins 2 & 3 | | | | | closed | |---+----------------------------+--------------+------------| |>> | Hard drive address | J12/jumper 1 | open | | | 1F0-1FFh | | | |---+----------------------------+--------------+------------| | | Hard drive address | J12/jumper 1 | closed | | | 170-177h | | | |---+----------------------------+--------------+------------| |>> | Floppy address 3F0-3F7h | J12/jumper 2 | open | |---+----------------------------+--------------+------------| | | Floppy address 370-377h | J12/jumper 2 | closed | |---+----------------------------+--------------+------------| |>> | Zero wait state disabled | J12/jumper 3 | open | |---+----------------------------+--------------+------------| | | Zero wait state enabled | J12/jumper 3 | closed | |---+----------------------------+--------------+------------| |>> | Not used | J12 jumper 4 | open | | | | & 5 | | |---+----------------------------+--------------+------------| |>> | Serial monitor disabled | J12/jumper 6 | open | |---+----------------------------+--------------+------------| | | Serial monitor enabled | J12/jumper 6 | closed | | | (2400b) | | | |---+----------------------------+--------------+------------| |>> | Hard drive Interrupt is | J18 | pins 1 & 2 | | | IRQ14 | | closed | |---+----------------------------+--------------+------------| | | Hard drive Interrupt is | J18 | pins 2 & 3 | | | IRQ15 | | closed | |---+----------------------------+--------------+------------| |>> | Not used | J18 | pins 3 & 4 | | | | | open | |---+----------------------------+--------------+------------| |>> | Floppy drive DMA | J19 | pins 1 & 2 | | | Acknowledge Is DACK2 | | closed | |---+----------------------------+--------------+------------| | | Floppy drive DMA | J19 | pins 2 & 3 | | | Acknowledge is DACK3 | | closed | |---+----------------------------+--------------+------------| |>> | Floppy drive Interrupt is | J20 | pins 1 & 2 | | | IRQ6 | | closed | |---+----------------------------+--------------+------------| | | Floppy drive Interrupt is | J20 | pins 2 & 3 | | | IRQ10 | | closed | |---+----------------------------+--------------+------------| |>> | Floppy drive DMA Request | J21 | pins 2 & 3 | | | is DREQ2 | | closed | |---+----------------------------+--------------+------------| | | Floppy drive DMA Request | J21 | pins 1 & 2 | | | is DREQ3 | | closed | +------------------------------------------------------------+