ADVANCED DIGITAL INFORMATION CORPORATION ======================================== BUSMASTER FAST-SCSI DCB-EISA Data bus: 32-bit, EISA Size: Full-length, full-height card Hard drive Up to seven SCSI devices supported: Floppy drives Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB supported: drives +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-----------------------------------------------+------------| | 4-pin-connector - drive active LED | J1 | |-----------------------------------------------+------------| | 34-pin control cable connector - floppy drive | J2 | |-----------------------------------------------+------------| | 50-pin SCSI connector - internal | J3 | |-----------------------------------------------+------------| | 50-pin SCSI connector - external | J4 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |--------------------------------+-------------+-------------| |>> | Floppy drive enabled | W8 | closed | |---+----------------------------+-------------+-------------| | | Floppy drive disabled | W8 | open | |---+----------------------------+-------------+-------------| | | Floppy drive enabled | J3 | pins 41 & | | | | | 42 closed | |---+----------------------------+-------------+-------------| | | Floppy drive disabled | J3 | pins 41 & | | | | | 42 open | |---+--------------------------------------------------------| | | Note (1):The floppy drive controller can be enabled | | | any one of three ways: | | | | | | (a) close jumper W8, or | | | | | | (b) close pins 41 & 42 of connector J3, or | | | | | | (c) select the floppy disk controller enabled option | | | in the EISA configuration file. | | | | | | Note (2):To disable the floppy disk controller, all | | | three of the above options must be disabled: | | | | | | (a) open jumper W8, and | | | | | | (b) open pins 41 & 42 of connector J3, and | | | | | | (c) select the floppy disk controller disabled option | | | in the EISA configuration file. | +------------------------------------------------------------+