ATC/UNITRON COMPUTERS & COMPUTER PARTS ====================================== QUICK TECHNOLOGY, INC. SIDE - 2935 (REV. 1.0) +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 32-bit PCI | |-------------------+----------------------------------------| | Size: | Half-length, three/quarter-height card | |-------------------+----------------------------------------| | Hard drive | Up to 15 SCSI devices | | supported: | | |-------------------+----------------------------------------| | Floppy drives | None | | supported: | | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |------------------------------------------+-----------------| | 50-pin SCSI-2 interface - external | J1 | |------------------------------------------+-----------------| | 50-pin SCSI-2 interface - internal | J2 | |------------------------------------------+-----------------| | 4-pin connector - drive active LED | J6 | +------------------------------------------------------------+ +------------------------------------------------------------+ | PCI INTERRUPTS SELECTIION | |------------------------------------------------------------| | INT | JP1/1 | JP1/2 | JP1/3 | JP1/4 | |-------------+-----------+-----------+-----------+----------| |>> | INTA | closed | open | open | open | |---+---------+-----------+-----------+-----------+----------| | | INTB | open | closed | open | open | |---+---------+-----------+-----------+-----------+----------| | | INTC | open | open | closed | open | |---+---------+-----------+-----------+-----------+----------| | | INTD | open | open | open | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | The terminator resistors (RP1, RP2, RP3) are to be removed | | only when the external and internal SCSI interfaces are | | used at the same time. | +------------------------------------------------------------+