AQUARIUS SYSTEMS, INC.
======================

   BF-1590

   +------------------------------------------------------------+
   |------------------------------------------------------------|
   | Data bus:         | 16-bit ISA                             |
   |-------------------+----------------------------------------|
   | Size:             | Half-length, full-height card          |
   |-------------------+----------------------------------------|
   | Hard drive        | Two IDE(AT) drives                     |
   | supported:        |                                        |
   |-------------------+----------------------------------------|
   | Floppy drives     | Two 360KB, 720KB, 1.2MB, or 1.44MB     |
   | supported:        | drives                                 |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/c/A-B/20927-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                 Function                 |    Location     |
   |------------------------------------------+-----------------|
   | 10-pin serial port 2 - internal          |       CN1       |
   |------------------------------------------+-----------------|
   | 9-pin serial port 1 - external           |       CN2       |
   |------------------------------------------+-----------------|
   | 25-pin parallel port - external          |       CN3       |
   |------------------------------------------+-----------------|
   | 40-pin IDE(AT) connector                 |       CN4       |
   |------------------------------------------+-----------------|
   | 34-pin cable connector - floppy drive    |       CN5       |
   |------------------------------------------+-----------------|
   | 4-pin connector - drive active LED       |       CN6       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |            Function            | Location |    Setting     |
   |--------------------------------+----------+----------------|
   | Floppy drive interface enabled |   JP1    |   pins 2 & 3   |
   |                                |          |     closed     |
   |--------------------------------+----------+----------------|
   | Floppy drive interface         |   JP1    |   pins 1 & 2   |
   | disabled                       |          |     closed     |
   |--------------------------------+----------+----------------|
   | IDE address is 1F0h            |   JP2    |   pins 2 & 3   |
   |                                |          |     closed     |
   |--------------------------------+----------+----------------|
   | IDE address is 170h            |   JP2    |   pins 1 & 2   |
   |                                |          |     closed     |
   |--------------------------------+----------+----------------|
   | Floppy address is 3F0h         |   JP3    |   pins 2 & 3   |
   |                                |          |     closed     |
   |--------------------------------+----------+----------------|
   | Floppy address is 370h         |   JP3    |   pins 1 & 2   |
   |                                |          |     closed     |
   |--------------------------------+----------+----------------|
   | IDE(AT) interface enabled      |   JP4    |   pins 2 & 3   |
   |                                |          |     closed     |
   |--------------------------------+----------+----------------|
   | IDE(AT) interface disabled     |   JP4    |   pins 1 & 2   |
   |                                |          |     closed     |
   |--------------------------------+----------+----------------|
   | Parallel port address is 378h  |   JP5    |   pins 2 & 3   |
   |                                |          |     closed     |
   |--------------------------------+----------+----------------|
   | Parallel port address is 278h  |   JP5    |   pins 1 & 2   |
   |                                |          |     closed     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |            USER CONFIGURABLE SETTINGS CONTINUED            |
   |------------------------------------------------------------|
   |             Function               | Location |  Setting   |
   |------------------------------------+----------+------------|
   | Serial Port 1 address is 3F8h      |   JP6    | pins 2 & 3 |
   | (COM1)                             |          |   closed   |
   |------------------------------------+----------+------------|
   | Serial Port 1 address is 3E8h      |   JP6    | pins 1 & 2 |
   | (COM3)                             |          |   closed   |
   |------------------------------------+----------+------------|
   | Serial Port 2 address is 2F8h      |   JP7    | pins 2 & 3 |
   | (COM2)                             |          |   closed   |
   |------------------------------------+----------+------------|
   | Serial Port 2 address is 2E8h      |   JP7    | pins 1 & 2 |
   | (COM4)                             |          |   closed   |
   +------------------------------------------------------------+