ADAPTEC, INC. ============= AMM-1525M Card Type Hard drive controller/Sound card Hard Drives supported Two IDE/ATAPI drives Up to 7 SCSI devices Floppy drives supported None Data Bus 16-bit ISA Card Size Three-quarter length, full-height +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | Function | Location | |----------------+----------+---------------------+----------| | 40-pin primary | CN1 | Line in | CN5 | | IDE/ATAPI | | | | | connector | | | | |----------------+----------+---------------------+----------| | 50-pin SCSI | CN2 | Line out | CN6 | | connector - | | | | | internal | | | | |----------------+----------+---------------------+----------| | 16-pin | CN3 | Headphones/speakers | CN7 | | game/MIDI port | | | | |----------------+----------+---------------------+----------| | Microphone in | CN4 | CD audio in | J3 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |---------------------------------+-------------+------------| |>> | IDE port address enabled | J4/pins 1 & | Open | | | | 2 | | |---+-----------------------------+-------------+------------| | | IDE port address disabled | J4/pins 1 & | Closed | | | | 2 | | |---+-----------------------------+-------------+------------| |>> | IDE is secondary in system | J4/pins 3 & | Closed | | | at 170h port address | 4 | | |---+-----------------------------+-------------+------------| | | IDE is primary in system at | J4/pins 3 & | Open | | | 1F0h port address | 4 | | |---+-----------------------------+-------------+------------| |>> | Sound chip base address is | J9 | Pins 1 & 2 | | | 220h | | closed | |---+-----------------------------+-------------+------------| | | Sound chip base address is | J9 | Pins 2 & 3 | | | 240h | | closed | |---+-----------------------------+-------------+------------| |>> | I/O port address is 340h | J10/E | Open | |---+-----------------------------+-------------+------------| | | I/O port address is 140h | J10/E | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SCSI INTERRUPT SELECTION | |------------------------------------------------------------| | IRQ | J10/A | J10/B | J10/C | J10/D | |--------------+-----------+-----------+----------+----------| | | IRQ9 | Open | Open | Open | Closed | |---+----------+-----------+-----------+----------+----------| | | IRQ10 | Open | Open | Closed | Open | |---+----------+-----------+-----------+----------+----------| |>> | IRQ11 | Open | Closed | Open | Open | |---+----------+-----------+-----------+----------+----------| | | IRQ12 | Closed | Open | Open | Open | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | SCSI termination on the controller is always enabled and | | cannot be changed since the controller is always at one | | end of the SCSI bus. | +------------------------------------------------------------+