ADVANCED SYSTEM PRODUCTS, INC.
==============================

   ABP-5142

   Card Type             Hard drive controller card               
   Hard Drives supported Up to 7 SCSI devices                     
   Data Bus              16-bit ISA                               
   Card Size             Half-length, half-height card            

<gopher://bitreich.org/I/th99/c/A-B/21761-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |        Function        | Location |  Function   | Location |
   |------------------------+----------+-------------+----------|
   | 4-pin connector -      |    J1    | 50-pin SCSI |    J3    |
   | drive active LED       |          | connector - |          |
   |                        |          | internal    |          |
   |------------------------+----------+-------------+----------|
   | 34-pin cable connector |    J2    | 50-pin SCSI |    J4    |
   | - floppy drive         |          | connector - |          |
   |                        |          | external    |          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       MODE SELECTION                       |
   |------------------------------------------------------------|
   |       Mode        |  SW1/1   |  SW1/2  |  SW1/3  |  SW1/4  |
   |-------------------+----------+---------+---------+---------|
   |   Plug and Play   |   Off    |   Off   |   On    |   Off   |
   |-------------------+----------+---------+---------+---------|
   |      Legacy       |   Off    |   Off   |   Off   |   Off   |
   |-------------------+----------+---------+---------+---------|
   |   Auto I/O port   |    On    |   Off   |   Off   |   Off   |
   |     increment     |          |         |         |         |
   |------------------------------------------------------------|
   |      Note: Do not leave the switches set in the auto I/O   |
   |      port increment setting.                               |
   +------------------------------------------------------------+