DISTRIBUTED PROCESSING TECHNOLOGY ================================= PM2012A/90, PM2012A/95 Data bus: 32-bit, EISA Size: Full-length, full-height card Hard drives supported: Up to seven SCSI devices Floppy drives supported: PM2012A/95:Two 360KB, 720KB, 1.2MB, or 1.44MB PM2012A/90:None Sector interleave: 1:1 +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |------------------------------------------+-----------------| | 4-pin connector-drive active LED | CN6 | |------------------------------------------+-----------------| | 34-pin data cable connector-floppy drive | CN8 | |------------------------------------------+-----------------| | 50-pin SCSI connector-internal | CN10 | |------------------------------------------+-----------------| | 50-pin SCSI connector-external | CN11 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |-------------------------------+--------------+-------------| |>> | BIOS enabled | JP7 | closed | |---+---------------------------+--------------+-------------| | | BIOS disabled | JP7 | open | |---+---------------------------+--------------+-------------| |>> | BIOS address C800h | JP19 | open | |---+---------------------------+--------------+-------------| | | BIOS address D800h | JP19 | closed | |---+---------------------------+--------------+-------------| |>> | Floppy drive enabled | JP20 | open | |---+---------------------------+--------------+-------------| | | Floppy drive disabled | JP20 | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | LEDZ INFORMATION | |------------------------------------------------------------| | Function | Location | |---------------------------------------------+--------------| | Disk controller busy | LED-1 | |---------------------------------------------+--------------| | SCSI command in progress | LED-2 | |---------------------------------------------+--------------| | SCSI bus disconnected | LED-3 | |---------------------------------------------+--------------| | PC/AT transfer to hard disk controller | LED-4 | |---------------------------------------------+--------------| | PC/AT transfer from hard disk controller | LED-5 | |---------------------------------------------+--------------| | Hard disk transfer to controller | LED-6 | |---------------------------------------------+--------------| | Hard disk transfer from controller | LED-7 | |---------------------------------------------+--------------| | PC/AT reset to controller | LED-8 | |---------------------------------------------+--------------| | Hard disk interrupt to PC/AT | LED-9 | |---------------------------------------------+--------------| | DRQ | LED-10 | +------------------------------------------------------------+