CMS ENHANCEMENTS, INC.
======================

   HBA-CMS3

   +------------------------------------------------------------+
   |------------------------------------------------------------|
   | Data bus:                | 16-bit ISA                      |
   |--------------------------+---------------------------------|
   | Size:                    | Half-length, full-height card   |
   |--------------------------+---------------------------------|
   | Hard drive supported:    | Two IDE (AT) interface drives   |
   |--------------------------+---------------------------------|
   | Floppy drives supported: | 360KB, 720KB, 1.2MB, 1.44MB     |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/c/C-D/20501-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                   Function                    |  Location  |
   |-----------------------------------------------+------------|
   | 40-pin IDE(AT) interface connector            |    CN1     |
   |-----------------------------------------------+------------|
   | 34-pin control cable connector - floppy drive |    CN2     |
   |-----------------------------------------------+------------|
   | IDE interface external LED connector          |    CN3     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |             Function              | Location  |  Setting   |
   |-----------------------------------+-----------+------------|
   |>> | Primary address select        | JP1 & JP2 | pins 1 & 2 |
   |   |                               |           |   closed   |
   |---+-------------------------------+-----------+------------|
   |   | Alternate address select      | JP1 & JP2 | pins 2 & 3 |
   |   |                               |           |   closed   |
   |---+-------------------------------+-----------+------------|
   |>> | IDE interface enabled         |    JP3    | pins 2 & 3 |
   |   |                               |           |   closed   |
   |---+-------------------------------+-----------+------------|
   |   | IDE interface disabled        |    JP3    | pins 1 & 2 |
   |   |                               |           |   closed   |
   |---+-------------------------------+-----------+------------|
   |>> | Floppy drive interface        |    JP4    | pins 2 & 3 |
   |   | enabled                       |           |   closed   |
   |---+-------------------------------+-----------+------------|
   |   | Floppy drive interface        |    JP4    | pins 1 & 2 |
   |   | disabled                      |           |   closed   |
   +------------------------------------------------------------+