DATA TECHNOLOGY CORPORATION =========================== DTC2280E (400521-89A) +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 16-bit ISA | |---------------------+--------------------------------------| | Size: | Half-length, half-height card | |---------------------+--------------------------------------| | Hard drive | Two IDE(AT) or EIDE interface drives | | supported: | | |---------------------+--------------------------------------| | Floppy drives | Two 360KB, 720KB, 1.2MB, 1.44MB | | supported: | | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |----------------------------------------+-------------------| | 25-pin parallel port - external | J1 | |----------------------------------------+-------------------| | 9-pin serial port 1 - external | J2 | |----------------------------------------+-------------------| | 10-pin serial port 2 - internal | J3 | |----------------------------------------+-------------------| | 16-pin game port - internal | J4 | |----------------------------------------+-------------------| | 34-pin cable connector - floppy drive | J5 | |----------------------------------------+-------------------| | 2-pin connector - drive active LED | J6 | |----------------------------------------+-------------------| | 40-pin IDE(AT) interface connector | J7 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Game port enabled | W1 | closed | |---+--------------------------------+----------+------------| | | Game port disabled | W1 | open | |---+--------------------------------+----------+------------| |>> | Hard drive interrupt IRQ14 | W15 | pins 1 & 2 | | | select | | closed | |---+--------------------------------+----------+------------| | | Hard drive interrupt IRQ15 | W15 | pins 2 & 3 | | | select | | closed | |---+--------------------------------+----------+------------| |>> | IDE(AT) interface address is | W17 | pins 1 & 2 | | | 1F0h | | closed | |---+--------------------------------+----------+------------| | | IDE(AT) interface address is | W17 | pins 2 & 3 | | | 170h | | closed | |---+--------------------------------+----------+------------| |>> | IDE(AT) interface enabled | W18 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | IDE(AT) interface disabled | W18 | pins 1 & 2 | | | | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 CONFIGURATION | |------------------------------------------------------------| | Port 1 | W21 | W22 | |----------------+---------------------+---------------------| |>> | COM1 | pins 1 & 2 closed | pins 2 & 3 closed | |---+------------+---------------------+---------------------| | | COM3 | pins 2 & 3 closed | pins 1 & 2 closed | |---+------------+---------------------+---------------------| | | Disabled | pins 1 & 2 closed | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 2 CONFIGURATION | |------------------------------------------------------------| | Port 2 | W23 | W24 | |----------------+---------------------+---------------------| |>> | COM2 | pins 1 & 2 closed | pins 2 & 3 closed | |---+------------+---------------------+---------------------| | | COM4 | pins 2 & 3 closed | pins 1 & 2 closed | |---+------------+---------------------+---------------------| | | Disabled | pins 1 & 2 closed | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT ADDRESS CONFIGURATION | |------------------------------------------------------------| | LPT | W19 | W20 | |----------------+---------------------+---------------------| |>> | 1 (378h) | pins 2 & 3 closed | pins 1 & 2 closed | |---+------------+---------------------+---------------------| | | 2 (278h) | pins 1 & 2 closed | pins 2 & 3 closed | |---+------------+---------------------+---------------------| | | 3 ( BCh) | pins 2 & 3 closed | pins 2 & 3 closed | |---+------------+---------------------+---------------------| | | Disabled | pins 1 & 2 closed | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 INTERRUPT SELECTION | |------------------------------------------------------------| | IRQ | W12 | W13 | W14 | |----------------+--------------+--------------+-------------| |>> | IRQ4 | open | open | closed | |---+------------+--------------+--------------+-------------| | | IRQ3 | open | closed | open | |---+------------+--------------+--------------+-------------| | | IRQ5 | closed | open | open | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 2 INTERRUPT SELECTION | |------------------------------------------------------------| | IRQ | W9 | W10 | W11 | |----------------+--------------+--------------+-------------| |>> | IRQ3 | open | open | closed | |---+------------+--------------+--------------+-------------| | | IRQ4 | open | closed | open | |---+------------+--------------+--------------+-------------| | | IRQ5 | closed | open | open | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT INTERRUPT SELECTION | |------------------------------------------------------------| | IRQ | W7 | W8 | |----------------------+------------------+------------------| |>> | 7 | open | closed | |------+---------------+------------------+------------------| | | 5 | closed | open | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT MODE CONFIGURATION | |------------------------------------------------------------| | MODE | W16 | W25 | |-----------------+---------------------+--------------------| |>> | Printer | pins 2 & 3 closed | pins 2 & 3 closed | |-----+-----------+---------------------+--------------------| | | ECP/EPP | pins 2 & 3 closed | pins 1 & 2 closed | |-----+-----------+---------------------+--------------------| | | EPP | pins 1 & 2 closed | pins 2 & 3 closed | |------------------------------------------------------------| | Note: You must select a DMA channel when using ECP mode. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DMA SELECTION | |------------------------------------------------------------| | CHANNEL | W3 | W4 | W5 | W6 | |------------+-----------+-----------+-----------+-----------| | 1 | closed | open | closed | open | |------------+-----------+-----------+-----------+-----------| | 3 | open | closed | open | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | The floppy controller in automatically configured: When a | | cable is attached, it is enabled, when no cable is | | attached it is disabled. | +------------------------------------------------------------+