DATA TECHNOLOGY CORPORATION =========================== DTC2277 (TEKRAM VER. 1) Chipset Tekram Maximum Onboard Memory Unidentified Data Bus 32-bit VESA local bus Card Size Full height, full length Hard Drives Supported Four IDE-AT devices Floppy Drives Supported Unidentified +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |--------------------+-------+-----------------------+-------| | 4-pin drive active | JP1 | 40-pin secondary | CN2 | | LED | | IDE(AT) connector | | |--------------------+-------+-----------------------+-------| | 4-pin connector to | JP2 | 34-pin cable | CN3 | | speaker | | connector - floppy | | | | | drive | | |--------------------+-------+-----------------------+-------| | 40-pin primary | CN1 | | | | IDE(AT) connector | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------+--------+---------------| |>> | Primary IDE channel noise | JDR0 | Open | | | filter mode 1 enabled | | | |----+------------------------------+--------+---------------| | | Primary IDE channel noise | JDR0 | Closed | | | filter mode 2 enabled | | | |----+------------------------------+--------+---------------| |>> | Secondary IDE channel noise | JDR1 | Open | | | filter mode 1 enabled | | | |----+------------------------------+--------+---------------| | | Secondary IDE channel noise | JDR1 | Closed | | | filter mode 2 enabled | | | |----+------------------------------+--------+---------------| |>> | Factory configured - do not | JP3 | Unidentified | | | alter | | | |----+------------------------------+--------+---------------| |>> | Factory configured - do not | RP1 | Unidentified | | | alter | | | |----+------------------------------+--------+---------------| |>> | Factory configured - do not | RP2 | Unidentified | | | alter | | | |----+------------------------------+--------+---------------| |>> | Factory configured - do not | RP3 | Unidentified | | | alter | | | |----+------------------------------+--------+---------------| |>> | Factory configured - do not | RP4 | Unidentified | | | alter | | | |----+------------------------------+--------+---------------| |>> | Factory configured - do not | RP5 | Unidentified | | | alter | | | |----+------------------------------+--------+---------------| |>> | Factory configured - do not | RP6 | Unidentified | | | alter | | | |----+------------------------------+--------+---------------| |>> | Factory configured - do not | RP7 | Unidentified | | | alter | | | |------------------------------------------------------------| | Note:The exact implementation of the noise filter | | modes are unidentified. However, mode 1 is compatible | | with most hard drives. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DRAM CONFIGURATION | |------------------------------------------------------------| | The configuration of the memory is unidentified. | +------------------------------------------------------------+