EVEREX SYSTEMS, INC. ==================== EV-391 +------------------------------------------------------------+ +------------------------------------------------------------+ Data bus: 8-bit, ISA Size: Full-length, full-height card Hard drives supported: Two MFM ST506/412 drives Floppy drives supported: None +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |----------------------------------------------+-------------| | 34-pin control cable connector-hard drive | J1 | |----------------------------------------------+-------------| | 20-pin data cable connector-drive 0 | J2 | |----------------------------------------------+-------------| | 20-pin data cable connector-drive 1 | J3 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |-----------------------------------+-----------+------------| |>> | Normal operation | W1 | pins 1 & 2 | | | | | closed | |---+-------------------------------+-----------+------------| | | Factory test | W1 | pins 2 & 3 | | | | | closed | |---+-------------------------------+-----------+------------| |>> | Normal operation | W2 | pins 1 & 2 | | | | | closed | |---+-------------------------------+-----------+------------| | | Factory test | W2 | pins 2 & 3 | | | | | closed | |---+-------------------------------+-----------+------------| |>> | BIOS enabled | W3 | closed | |---+-------------------------------+-----------+------------| | | BIOS disabled | W3 | open | |---+-------------------------------+-----------+------------| |>> | I/O port address 320h | W4 | pins 2 & 3 | | | | | closed | |---+-------------------------------+-----------+------------| | | I/O port address 324h | W4 | pins 1 & 2 | | | | | closed | |---+-------------------------------+-----------+------------| |>> | BIOS size 32K or 64K | W5 | pins 1 & 2 | | | | | closed | |---+-------------------------------+-----------+------------| | | BIOS size 16K | W5 | pins 2 & 3 | | | | | closed | |---+-------------------------------+-----------+------------| |>> | 8 Head hard drive with RWC | W6 | pins 2 & 3 | | | (Head Select 3 invalid) | | closed | |---+-------------------------------+-----------+------------| | | 16 head hard drive supported | W6 | pins 1 & 2 | | | (Head Select 3 valid) | | closed | |---+-------------------------------+-----------+------------| |>> | Hard drive interrupt is IRQ5 | W7 | pins 1 & 2 | | | | | closed | |---+-------------------------------+-----------+------------| | | Hard drive interrupt is IRQ2 | W7 | pins 2 & 3 | | | | | closed | |------------------------------------------------------------| | Note:SW1/switches 5, 6, 7, and 8 are reserved for BIOS | | functions and should not be altered. | +------------------------------------------------------------+ +------------------------------------------------------------+ | BIOS DRIVE TYPE TABLE - SW1 | | | | (FOR EPROM REV. 3.92A) | |------------------------------------------------------------| |# |Jumper 1 |Jumper 2 |Jumper 3 |Jumper 4 |Cap. |Hds. |Cyls.| | | | | | | | | | | | Drv. 1 | Drv. 1 | Drv. 0 | Drv. 0 | | | | |--+---------+---------+---------+---------+-----+-----+-----| |0 | closed | closed | closed | closed |42MB | 5 | 977 | |--+---------+---------+---------+---------+-----+-----+-----| |1 | open | closed | open | closed |21MB | 4 | 615 | |--+---------+---------+---------+---------+-----+-----+-----| |2 | closed | open | closed | open |10MB | 2 | 615 | |--+---------+---------+---------+---------+-----+-----+-----| |3 | open | open | open | open |10MB | 4 | 306 | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | This controller has a built-in low-level format program. | | To enter the program run the DEBUG utility supplied with | | DOS and at the prompt enter: G=C800:5. | +------------------------------------------------------------+