MAXTOR CORPORATION
==================

   AT ADAPTER BOARD

   +------------------------------------------------------------+
   +------------------------------------------------------------+

   Data bus: 16-bit, ISA

   Size: Half-length, full height card

   Hard drives supported:  Two IDE (AT) Interface drives

   Floppy drives supported: None

<gopher://bitreich.org/I/th99/c/M-O/20279-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                   Function                   |  Location   |
   |----------------------------------------------+-------------|
   | 40-pin AT Interface (IDE) connector-internal |     CN1     |
   |----------------------------------------------+-------------|
   | 2-pin connector-drive active LED             |     CN2     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |             Function              |   Location   | Setting |
   |-----------------------------------+--------------+---------|
   |>> | Hard drive port address is    | JP1/Jumper 1 |  open   |
   |   | 1F0-1F7h                      |              |         |
   |---+-------------------------------+--------------+---------|
   |   | Hard drive port address is    | JP1/Jumper 1 | closed  |
   |   | 170-177h                      |              |         |
   |---+-------------------------------+--------------+---------|
   |>> | I/O Channel Ready enabled     | JP1/Jumper 2 | closed  |
   |---+-------------------------------+--------------+---------|
   |   | I/O Channel Ready disabled    | JP1/Jumper 2 |  open   |
   |---+-------------------------------+--------------+---------|
   |>> | Factory configured - do not   | JP1/Jumper 3 |  open   |
   |   | alter                         |              |         |
   |---+-------------------------------+--------------+---------|
   |>> | Factory configured - do not   | JP1/Jumper 4 | closed  |
   |   | alter                         |              |         |
   |---+-------------------------------+--------------+---------|
   |>> | Factory configured - do not   | JP1/Jumper 5 |  open   |
   |   | alter                         |              |         |
   |---+-------------------------------+--------------+---------|
   |>> | Drive active LED enabled      | JP1/Jumper 6 | closed  |
   |---+-------------------------------+--------------+---------|
   |   | Drive active LED disabled     | JP1/Jumper 6 |  open   |
   +------------------------------------------------------------+