OCEAN INFORMATION SYSTEMS, INC. =============================== VL-COMBO SUPER REV.1.2 +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 32-bit, VL-bus | |---------------+--------------------------------------------| | Size: | Three/quarter-length, full-height card | |---------------+--------------------------------------------| | Hard drive | Two IDE (AT) interface drives | | supported: | | |---------------+--------------------------------------------| | Floppy drives | Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB | | supported: | drives | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-----------------------------------------------+------------| | 40-pin IDE (AT) Interface connector | P1 | |-----------------------------------------------+------------| | 4-pin connector - drive active LED | P2 | |-----------------------------------------------+------------| | VGA feature connector | P3 | |-----------------------------------------------+------------| | 34-pin control cable connector - floppy drive | P4 | |-----------------------------------------------+------------| | 10-pin serial port 2 | P5 | |-----------------------------------------------+------------| | 10-pin serial port 1 | P7 | |-----------------------------------------------+------------| | 15-pin analog video connector | J2 | |-----------------------------------------------+------------| | 25-pin parallel port | J3 | +------------------------------------------------------------+ +------------------------------------------------------------+ | IDE DRIVE SELECT | |------------------------------------------------------------| | Function | JP1 | JP2 | |------------------------+----------------+------------------| |>> | IDE drive enabled | pins 1 & 2 | pins 1 & 2 | | | | closed | closed | |---+--------------------+----------------+------------------| | | IDE drive disabled | pins 2 & 3 | pins 2 & 3 | | | | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | IDE DRIVE SPEED SELECT | |------------------------------------------------------------| | Function | JP3 | JP4 | |--------------------------------+-------------+-------------| |>> | IDE speed = normal | pins 1 & 2 | pins 1 & 2 | | | | closed | closed | |----+---------------------------+-------------+-------------| | | IDE speed = medium | pins 2 & 3 | pins 1 & 2 | | | | closed | closed | |----+---------------------------+-------------+-------------| | | IDE speed = high | pins 2 & 3 | pins 2 & 3 | | | | closed | closed | |----+---------------------------+-------------+-------------| | | Factory configuration - | pins 1 & 2 | pins 2 & 3 | | | do not use | closed | closed | |------------------------------------------------------------| | Note: Do not use the last setting, could cause damage. | +------------------------------------------------------------+ +------------------------------------------------------------+ | VIDEO PORT | |------------------------------------------------------------| | Function | JP5 | JP6 | |-----------------------+----------------+-------------------| |>> | VGA port enabled | pins 1 & 2 | pins 1 & 2 closed | | | | closed | | |---+-------------------+----------------+-------------------| | | VGA port disabled | pins 2 & 3 | pins 2 & 3 closed | | | | closed | | +------------------------------------------------------------+ +------------------------------------------------------------+ | VIDEO PORT | |------------------------------------------------------------| | Function | JP22 | JP23 | |----------------------------------+------------+------------| |>> | Parallel port uses DMA | pins 1 & 2 | pins 1 & 2 | | | channel 1 | closed | closed | |---+------------------------------+------------+------------| | | Parallel port uses DMA | pins 2 & 3 | pins 2 & 3 | | | channel 3 | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |-----------------------------+----------+-------------------| |>> | Factory configured - do | JP12 | pins 2 & 3 closed | | | not alter | | | |---+-------------------------+----------+-------------------| |>> | Floppy drive enabled | JP19 | pins 1 & 2 closed | |---+-------------------------+----------+-------------------| | | Floppy drive disabled | JP19 | pins 2 & 3 closed | |---+-------------------------+----------+-------------------| |>> | ECP/EPP printer modes | JP24 | pins 1 & 2 closed | | | enabled | | | |---+-------------------------+----------+-------------------| | | ECP/EPP printer modes | JP24 | pins 2 & 3 closed | | | disabled | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT INTERRUPT SELECT | |------------------------------------------------------------| | IRQ | JP11 | |---------------------------+--------------------------------| |>> | IRQ7 | pins 2 & 3 closed | |---+-----------------------+--------------------------------| | | IRQ5 | pins 1 & 2 closed | |---+-----------------------+--------------------------------| | | Disabled | all pins open | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT CONFIGURATION | |------------------------------------------------------------| | LPT/Address | JP13 | JP14 | |------------------+--------------------+--------------------| |>> | LPT1/378h | pins 2 & 3 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | LPT2/278h | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | LPT3/3BCh | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 CONFIGURATION | |------------------------------------------------------------| | COM/Address | JP15 | JP16 | |------------------+--------------------+--------------------| |>> | COM1/3F8h | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM2/2F8h | pins 2 & 3 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM3/338h | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 2 CONFIGURATION | |------------------------------------------------------------| | COM/Address | JP17 | JP18 | |------------------+--------------------+--------------------| |>> | COM2/2F8h | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM1/3F8h | pins 2 & 3 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM4/238h | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | pins 2 & 3 closed | +------------------------------------------------------------+