MICRO EQUIPMENT CORPORATION =========================== UN-1063 +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 16-bit, ISA | |-------------------+----------------------------------------| | Size: | Half-length, full-height card | |-------------------+----------------------------------------| | Hard drive | Two IDE (AT) Interface drives | | supported: | | |-------------------+----------------------------------------| | Floppy drives | Two 360KB, 720KB, 1.2MB, or 1.44MB | | supported: | drives | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-----------------------------------------------+------------| | 2-pin connector - drive active LED | CN1 | |-----------------------------------------------+------------| | 40-pin IDE (AT) interface connector | CN2 | |-----------------------------------------------+------------| | 34-pin control cable connector - floppy drive | CN3 | |-----------------------------------------------+------------| | 10-pin serial port 1 | CN4 | |-----------------------------------------------+------------| | 10-pin serial port 2 | CN5 | |-----------------------------------------------+------------| | Game port | CN6 | |-----------------------------------------------+------------| | 25-pin parallel port | CN7 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |----------------------------+-----------+-------------------| |>> | Hard drive enabled | J1 | pins 1 & 2 closed | |---+------------------------+-----------+-------------------| | | Hard drive disabled | J1 | pins 2 & 3 closed | |---+------------------------+-----------+-------------------| |>> | Floppy drive enabled | J2 | pins 1 & 2 closed | |---+------------------------+-----------+-------------------| | | Floppy drive disabled | J2 | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 CONFIGURATION | |------------------------------------------------------------| | COM/Address | J5 | J6 | |------------------+--------------------+--------------------| |>> | COM1/3F8h | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM3/3E8h | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | n/a | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 2 CONFIGURATION | |------------------------------------------------------------| | COM/Address | J3 | J4 | |------------------+--------------------+--------------------| |>> | COM2/2F8h | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM4/2E8h | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | n/a | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT CONFIGURATION | |------------------------------------------------------------| | LPT/Address | J7 | J8 | |------------------+--------------------+--------------------| |>> | LPT1/378h | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | LPT2/278h | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | n/a | +------------------------------------------------------------+