PERCEPTIVE SOLUTIONS, INC.
==========================

   WINSTOR, QUICKCACHE

   +------------------------------------------------------------+
   +------------------------------------------------------------+

   Data bus: 16-bit, ISA

   Size: Full-length, full-height card

   Hard Drives Supported: Four AT Interface (IDE) drives

   Floppy Drives Supported: Two or Four 360KB, 720KB, 1.2MB, or


<gopher://bitreich.org/I/th99/c/P-R/20161-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                    Functiion                    | Location |
   |-------------------------------------------------+----------|
   | 4-pin connector-drive active LED                |    J1    |
   |-------------------------------------------------+----------|
   | 40-pin control cable connector-hard drive 1&2   |    J3    |
   |-------------------------------------------------+----------|
   | 40-pin control cable connector-hard drive 3&4   |    J4    |
   |-------------------------------------------------+----------|
   | 34-pin control cable connector-floppy drive     |    J5    |
   |-------------------------------------------------+----------|
   | 34-pin control cable connector-floppy drive     |    J6    |
   | (optional)                                      |          |
   |-------------------------------------------------+----------|
   | 50-pin receptacle-Hardware Data Compression     |    J7    |
   | Module (winSTOR only)                           |          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |             Function              |   Location   | Setting |
   |-----------------------------------+--------------+---------|
   |>> | Floppy drive enabled          | SW1/switch 1 |   off   |
   |---+-------------------------------+--------------+---------|
   |   | Floppy drive disabled         | SW1/switch 1 |   on    |
   |---+-------------------------------+--------------+---------|
   |>> | Single-speed floppy supported | SW1switch 2  |   off   |
   |---+-------------------------------+--------------+---------|
   |   | Dual-speed floppy supported   | SW1/switch 2 |   on    |
   |---+-------------------------------+--------------+---------|
   |>> | Factory configured - do not   | SW1/switch 3 |   off   |
   |   | alter                         |              |         |
   |---+-------------------------------+--------------+---------|
   |>> | Factory configured - do not   | SW1/switch 4 |   off   |
   |   | alter                         |              |         |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   | Both the winSTOR and the quickCACHE may use 256KB, 1MB or  |
   |  4MB x8 or x9 SIMM's (100ns or faster). A minimum of 512K  |
   |   cache is required for operation. The winSTOR has 512K    |
   |      on-board and does not require SIMM's to operate.      |
   +------------------------------------------------------------+