QUANTUM CORPORATION =================== AT-BUS ADAPTER BOARD +------------------------------------------------------------+ +------------------------------------------------------------+ Data bus: 16-bit, ISA Size: Half-length, full-height card Hard drives supported: Two IDE (AT) Interface drives Floppy drives supported: None +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |------------------------------------------+-----------------| | 40-pin IDE (AT) Interface connector | CN1 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Interrupt gated directly to AT | JP2 | pins 2 & 3 | | | Bus | | closed | |---+--------------------------------+----------+------------| | | Interrupt issued every time | JP2 | pins 1 & 2 | | | drive goes busy | | closed | |---+--------------------------------+----------+------------| |>> | Factory configured - do not | JP3 | open | | | alter | | | |---+--------------------------------+----------+------------| |>> | Zero Wait State enabled | JP4 | open | |---+--------------------------------+----------+------------| | | One Wait State enabled | JP4 | closed | |---+--------------------------------+----------+------------| |>> | Hard drive port address is | JP5 | open | | | 1F0-1F7h | | | |---+--------------------------------+----------+------------| | | Hard drive port address is | JP5 | closed | | | 170-177h | | | +------------------------------------------------------------+