RELIALOGIC CORPORATION PRIVATE, LTD. ==================================== XL505 +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 32-bit, VL-Bus | |-------------------+----------------------------------------| | Size: | Three quarter-length, half-height card | |-------------------+----------------------------------------| | Hard drive | Two IDE (AT) interface drives | | supported: | | |-------------------+----------------------------------------| | Floppy drives | 360KB, 720KB, 1.2MB, or 1.44MB drives | | supported: | | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-------------------------------------------------+----------| | 25-pin parallel port | J1 | |-------------------------------------------------+----------| | 9-pin serial port 1 (external)/10-pin serial | J2 | | port (internal) | | |-------------------------------------------------+----------| | 10-pin serial port 2 - internal | J4 | |-------------------------------------------------+----------| | 34-pin connector - floppy drive | J5 | |-------------------------------------------------+----------| | 40-pin IDE(AT) interface | J6 | |-------------------------------------------------+----------| | 4-pin drive active LED | J7 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Factory configured - do no | JP4 | open | | | alter | | | |---+--------------------------------+----------+------------| |>> | IDE interface enabled | JP6 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | IDE interface disabled | JP6 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Floppy drive interface enabled | JP7 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Floppy drive interface | JP7 | pins 2 & 3 | | | disabled | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | BASE ADDRESS SELECTION | |------------------------------------------------------------| | Address | JP3/1 | JP3/2 | JP3/3 | |-------------------+-------------+-------------+------------| |>> | C800-CBFFh | closed | closed | closed | |---+---------------+-------------+-------------+------------| | | CC00-CFFFh | open | closed | closed | |---+---------------+-------------+-------------+------------| | | D000-D3FFh | closed | open | closed | |---+---------------+-------------+-------------+------------| | | D400-D7FFh | open | open | closed | |---+---------------+-------------+-------------+------------| | | D800-DBFFh | closed | closed | open | |---+---------------+-------------+-------------+------------| | | DC00-DFFFh | open | closed | open | |---+---------------+-------------+-------------+------------| | | Disabled | open | open | closed | |---+---------------+-------------+-------------+------------| | | Disabled | open | open | open | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT CONFIGURATION | |------------------------------------------------------------| | LPT | JP12 | JP13 | |------------------+--------------------+--------------------| |>> | LPT2 | pins 2 & 3 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | LPT1 | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | LPT3 | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 & 2 CONFIGURATION | |------------------------------------------------------------| | COM (Serial | COM (Serial | JP9 | JP10 | JP11 | | Port 1) | Port 2) | | | | |---------------+-----------------+--------+--------+--------| |>> | COM1 | COM2 | pins 1 | pins 1 | pins 2 | | | | | & 2 | & 2 | & 3 | |---+-----------+-----------------+--------+--------+--------| | | COM2 | COM1 | pins 1 | pins 1 | pins 1 | | | | | & 2 | & 2 | & 2 | |---+-----------+-----------------+--------+--------+--------| | | COM3 | COM4 | pins 2 | pins 2 | pins 1 | | | | | & 3 | & 3 | & 2 | |---+-----------+-----------------+--------+--------+--------| | | COM1 | Disabled | pins 1 | pins 2 | pins 2 | | | | | & 2 | & 3 | & 3 | |---+-----------+-----------------+--------+--------+--------| | | COM2 | Disabled | pins 2 | pins 1 | pins 1 | | | | | & 3 | & 2 | & 2 | |---+-----------+-----------------+--------+--------+--------| | | Disabled | COM1 | pins 1 | pins 2 | pins 1 | | | | | & 2 | & 3 | & 2 | |---+-----------+-----------------+--------+--------+--------| | | Disabled | COM2 | pins 2 | pins 1 | pins 2 | | | | | & 3 | & 2 | & 3 | |---+-----------+-----------------+--------+--------+--------| | | Disabled | Disabled | pins 2 | pins 2 | pins 2 | | | | | & 3 | & 3 | & 3 | |------------------------------------------------------------| | Note: Designated pins are in the closed position. | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 & 2 INTERRUPT SELECTION | |------------------------------------------------------------| | IRQ (Serial | IRQ (Serial Port | JP5 | JP8 | | Port 1) | 2) | | | |-------------+--------------------+------------+------------| |>> | 4 | 3 | pins 1 & 2 | pins 2 & 3 | |------+------+--------------------+------------+------------| | | 3 | 4 | pins 2 & 3 | pins 1 & 2 | |------------------------------------------------------------| | Note: Designated pins are in the closed position. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | IRQ 7 for the parallel port is factory configured and | | cannot be altered. | +------------------------------------------------------------+