Q LOGIC CORPORATION
===================

   QLA 1240

   Card Type       Hard drive controller card                     
   Chip Set        Unidentified                                   
   Maximum Onboard Unidentified                                   
   Memory          
   Hard Drives     Up to 30 SCSI-2 Fast/Wide devices or 6 Ultra   
   supported       SCSI devices                                   
   Floppy drives   None                                           
   supported       
   Data Bus        32-bit PCI                                     

<gopher://bitreich.org/I/th99/c/P-R/21604-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |         Function          | Label |    Function    | Label |
   |---------------------------+-------+----------------+-------|
   | 68-pin SCSI connector -   |  J1   | 68-pin SCSI    |  J3   |
   | external                  |       | connector -    |       |
   |                           |       | internal       |       |
   |---------------------------+-------+----------------+-------|
   | 68-pin SCSI connector -   |  J2   | LED connector  |  J9   |
   | external                  |       |                |       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              CHANNEL 1 TERMINATION SELECTION               |
   |------------------------------------------------------------|
   |         Setting          |       J7       |       J8       |
   |--------------------------+----------------+----------------|
   | High termination enabled |     Closed     |      Open      |
   |--------------------------+----------------+----------------|
   |   Termination disabled   |      N/A       |     Closed     |
   |------------------------------------------------------------|
   | Note: Channel 1 uses connectors J2 & J3.                   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              CHANNEL 2 TERMINATION SELECTION               |
   |------------------------------------------------------------|
   |         Setting          |       J5       |       J6       |
   |--------------------------+----------------+----------------|
   | High termination enabled |     Closed     |      Open      |
   |--------------------------+----------------+----------------|
   |   Termination disabled   |      N/A       |     Closed     |
   |------------------------------------------------------------|
   | Note: Channel 2 uses connector J1.                         |
   +------------------------------------------------------------+