PINE TECHNOLOGY
===============

   AI-1078E

   Card Type     Controller card                                  
   Hard Drives   Two IDE (AT) drives                              
   supported     
   Floppy drives Two 360KB, 720KB, 1.2MB, or 1.44MB drives        
   supported     
   I/O Options   Floppy drive interface, game port, IDE           
                 interface, parallel port, serial ports (2)       
   Data Bus      16-bit ISA                                       
   Card Size     Half-length, half-height card                    

<gopher://bitreich.org/I/th99/c/P-R/21613-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |       Function       | Label |      Function       | Label |
   |----------------------+-------+---------------------+-------|
   | 34-pin cable         |  CN1  | 10-pin serial port  |  CN5  |
   | connector - floppy   |       | 2 - internal        |       |
   | drive                |       |                     |       |
   |----------------------+-------+---------------------+-------|
   | 40-pin IDE(AT)       |  CN2  | 9-pin serial port 1 |  CN6  |
   | connector            |       | - external          |       |
   |----------------------+-------+---------------------+-------|
   | 2-pin connector -    |  CN3  | 25-pin parallel     |  CN7  |
   | IDE drive active LED |       | port - external     |       |
   |----------------------+-------+---------------------+-------|
   | 16-pin game port -   |  CN4  |                     |       |
   | internal             |       |                     |       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |              Function               | Label |   Position   |
   |-------------------------------------+-------+--------------|
   |>> | Floppy drive order is normal    | JP6/A |  Pins 1 & 2  |
   |   | (A:, B:)                        |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |   | Floppy drive order is reversed  | JP6/A |  Pins 2 & 3  |
   |   | (B:, A:)                        |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |>> | Floppy drive address is 3F0h    | JP6/B |  Pins 2 & 3  |
   |   |                                 |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |   | Floppy drive address is 370h    | JP6/B |  Pins 1 & 2  |
   |   |                                 |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |>> | IDE(AT) interface enabled       | JP6/C |  Pins 1 & 2  |
   |   |                                 |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |   | IDE(AT) interface disabled      | JP6/C |  Pins 2 & 3  |
   |   |                                 |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |>> | IDE(AT) address is 3F0h, 1F0h   | JP6/D |  Pins 2 & 3  |
   |   |                                 |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |   | IDE(AT) address is 370h, 170h   | JP6/D |  Pins 1 & 2  |
   |   |                                 |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |>> | Floppy drive interface enabled  | JP6/E |  Pins 1 & 2  |
   |   |                                 |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |   | Floppy drive interface disabled | JP6/E |  Pins 2 & 3  |
   |   |                                 |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |>> | Game port enabled               | JP16  |    Closed    |
   |---+---------------------------------+-------+--------------|
   |   | Game port disabled              | JP16  |     Open     |
   |---+---------------------------------+-------+--------------|
   |>> | IDE interface interrupt set to  | JP19  |  Pins 1 & 2  |
   |   | IRQ14                           |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |   | IDE interface interrupt set to  | JP19  |  Pins 2 & 3  |
   |   | IRQ15                           |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |>> | DRQ1 enabled                    | JP20  |  Pins 1 & 2  |
   |   |                                 |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |   | DRQ3 enabled                    | JP20  |  Pins 2 & 3  |
   |   |                                 |       |    closed    |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     | JP21  | Unidentified |
   |   | alter                           |       |              |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     | JP22  | Unidentified |
   |   | alter                           |       |              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              SERIAL PORT 1 ADDRESS SELECTION               |
   |------------------------------------------------------------|
   |     Setting      |       JP9/A        |       JP9/B        |
   |------------------+--------------------+--------------------|
   |>> | COM1 (3F8h)  | Pins 1 & 2 closed  | Pins 2 & 3 closed  |
   |---+--------------+--------------------+--------------------|
   |   | COM3 (3E8h)  | Pins 2 & 3 closed  | Pins 1 & 2 closed  |
   |---+--------------+--------------------+--------------------|
   |   |   Disabled   | Pins 2 & 3 closed  | Pins 2 & 3 closed  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              SERIAL PORT 2 ADDRESS SELECTION               |
   |------------------------------------------------------------|
   |     Setting      |       JP9/C        |       JP9/D        |
   |------------------+--------------------+--------------------|
   |>> | COM2 (2F8h)  | Pins 1 & 2 closed  | Pins 2 & 3 closed  |
   |---+--------------+--------------------+--------------------|
   |   | COM4 (2E8h)  | Pins 2 & 3 closed  | Pins 1 & 2 closed  |
   |---+--------------+--------------------+--------------------|
   |   |   Disabled   | Pins 2 & 3 closed  | Pins 2 & 3 closed  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |             SERIAL PORT 1 INTERRUPT SELECTION              |
   |------------------------------------------------------------|
   |       IRQ        |   JP12/A    |   JP12/B    |   JP12/C    |
   |------------------+-------------+-------------+-------------|
   |    |      3      |   Closed    |    Open     |    Open     |
   |----+-------------+-------------+-------------+-------------|
   |>>  |      4      |    Open     |   Closed    |    Open     |
   |----+-------------+-------------+-------------+-------------|
   |    |      5      |    Open     |    Open     |   Closed    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |             SERIAL PORT 2 INTERRUPT SELECTION              |
   |------------------------------------------------------------|
   |       IRQ        |   JP12/D    |   JP12/E    |   JP12/F    |
   |------------------+-------------+-------------+-------------|
   |>>  |      3      |   Closed    |    Open     |    Open     |
   |----+-------------+-------------+-------------+-------------|
   |    |      4      |    Open     |   Closed    |    Open     |
   |----+-------------+-------------+-------------+-------------|
   |    |      5      |    Open     |    Open     |   Closed    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              PARALLEL PORT ADDRESS SELECTION               |
   |------------------------------------------------------------|
   |     Setting      |       JP9/E        |       JP9/F        |
   |------------------+--------------------+--------------------|
   |>> | LPT1 (378h)  | Pins 2 & 3 closed  | Pins 1 & 2 closed  |
   |---+--------------+--------------------+--------------------|
   |   | LPT2 (278h)  | Pins 1 & 2 closed  | Pins 2 & 3 closed  |
   |---+--------------+--------------------+--------------------|
   |   | LPT3 (3BCh)  | Pins 1 & 2 closed  | Pins 1 & 2 closed  |
   |---+--------------+--------------------+--------------------|
   |   |   Disabled   | Pins 2 & 3 closed  | Pins 2 & 3 closed  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |             PARALLEL PORT INTERRUPT SELECTION              |
   |------------------------------------------------------------|
   |         IRQ          |      JP12/G      |      JP12/H      |
   |----------------------+------------------+------------------|
   |      |       5       |      Closed      |       Open       |
   |------+---------------+------------------+------------------|
   |>>    |       7       |       Open       |      Closed      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                PARALLEL PORT MODE SELECTION                |
   |------------------------------------------------------------|
   |     Setting      |        JP17        |        JP18        |
   |------------------+--------------------+--------------------|
   |>> |   Printer    | Pins 2 & 3 closed  | Pins 1 & 2 closed  |
   |---+--------------+--------------------+--------------------|
   |   |   EPP/ECP    | Pins 1 & 2 closed  | Pins 1 & 2 closed  |
   |---+--------------+--------------------+--------------------|
   |   |   EPP/SPP    | Pins 1 & 2 closed  | Pins 2 & 3 closed  |
   |---+--------------+--------------------+--------------------|
   |   |   EXT2FDD    | Pins 2 & 3 closed  | Pins 2 & 3 closed  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |            PRINTER OUTPUT &AMP; DACK SELECTION             |
   |------------------------------------------------------------|
   |           Setting            |  JP23   |  JP24   |  JP25   |
   |------------------------------+---------+---------+---------|
   |>> |     Uni-directional      | Closed  |  Open   |  Open   |
   |---+--------------------------+---------+---------+---------|
   |   | Bi-Directional (EPP/ECP) |  Open   |  Open   |  Open   |
   |---+--------------------------+---------+---------+---------|
   |   |          DACK1           |  Open   | Closed  |  Open   |
   |---+--------------------------+---------+---------+---------|
   |   |          DACK3           |  Open   |  Open   | Closed  |
   +------------------------------------------------------------+