SILICON VALLEY COMPUTER INC. ============================ ADP111V +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 32-bit, VL-bus | |---------------+--------------------------------------------| | Size: | Full-length, full-height card | |---------------+--------------------------------------------| | Hard drive | (2) IDE(AT) interface drives, (2) IDE | | supported: | mirror drives, IDE tape drive | |---------------+--------------------------------------------| | Floppy drives | 360KB, 720KB, 1.2MB, or 1.44MB drives | | supported: | | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-------------------------------------------------+----------| | 9-pin serial port 1 - internal | COM1 | |-------------------------------------------------+----------| | 9-pin serial port 2 - external | COM2 | |-------------------------------------------------+----------| | 15-pin connector - game port | GAME1 | |-------------------------------------------------+----------| | 4-pin connector - Mirror drive active LED | J1 | |-------------------------------------------------+----------| | 4-pin connector - primary drive active LED | J2 | |-------------------------------------------------+----------| | 40-pin connector - IDE mirror drive cable | J3 | |-------------------------------------------------+----------| | 40-pin IDE(AT) interface connector | J4 | |-------------------------------------------------+----------| | 40-pin ISA IDE tape/IDE CD-ROM interface | P1 | | connector | | |-------------------------------------------------+----------| | 34-pin control cable connector - floppy drive | P2 | |-------------------------------------------------+----------| | 4-pin connector - IDE tape/IDE CD-ROM drive | P3 | | active LED | | |-------------------------------------------------+----------| | 25-pin parallel port - external | P4 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |-----------------------------+----------+-------------------| | | 8051/8031 micro | E1 | pins 1 & 2, 3 & 4 | | | controller is installed | | closed | |---+-------------------------+----------+-------------------| | | 80C51/80C31 micro | E1 | pins 2 & 3 closed | | | controller is installed | | | |---+-------------------------+----------+-------------------| |>> | Serial port 2 enabled | E3 | pins 2 & 3 closed | |---+-------------------------+----------+-------------------| | | Serial port 2 disabled | E3 | pins 1 & 2 closed | |---+-------------------------+----------+-------------------| |>> | Parallel port enabled | E4 | pins 2 & 3 closed | |---+-------------------------+----------+-------------------| | | Parallel port disabled | E4 | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS(CONTINUED) | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | ISA IDE interface enabled | E5 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | ISA IDE interface disabled | E5 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Floppy drive interface enabled | E6 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Floppy drive interface | E6 | pins 1 & 2 | | | disabled | | closed | |---+--------------------------------+----------+------------| |>> | Serial port 2 address 2F8 - | E7 | pins 2 & 3 | | | 2EFh select | | closed | |---+--------------------------------+----------+------------| | | Serial port 2 address 2E8 - | E7 | pins 1 & 2 | | | 2EFh select | | closed | |---+--------------------------------+----------+------------| |>> | Serial port 1 address 3F8 - | E8 | pins 2 & 3 | | | 3FFh select | | closed | |---+--------------------------------+----------+------------| | | Serial port 1 address 3E8 - | E8 | pins 1 & 2 | | | 3EFh select | | closed | |---+--------------------------------+----------+------------| |>> | Serial port 1 enabled | E9 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 1 disabled | E9 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Parallel port address 378 - | E10 | pins 2 & 3 | | | 37Fh select | | closed | |---+--------------------------------+----------+------------| | | Parallel port address 278 - | E10 | pins 1 & 2 | | | 27Fh select | | closed | |---+--------------------------------+----------+------------| |>> | Game port enabled | E11 & | closed | | | | E12 | | |---+--------------------------------+----------+------------| | | Game port disabled | E11 & | open | | | | E12 | | |---+--------------------------------+----------+------------| |>> | ISA IDE tape drive interrupt | E13 | pins 2 & 3 | | | IRQ15 select | | closed | |---+--------------------------------+----------+------------| | | ISA IDE tape drive interrupt | E13 | pins 1 & 2 | | | IRQ10 select | | closed | |---+--------------------------------+----------+------------| | | ISA IDE tape drive interrupt | E13 | pins 4 & 5 | | | IRQ14 select(do not use) | | closed | |---+--------------------------------+----------+------------| |>> | VESA IDE interface interrupt | E13 | pins 5 & 6 | | | IRQ14 select | | closed | |---+--------------------------------+----------+------------| | | VESA IDE interface interrupt | E13 | pins 6 & 7 | | | IRQ15 select(do not use) | | closed | |---+--------------------------------+----------+------------| | | Factory configured - do not | S1/4 | N/A | | | alter | | | |---+--------------------------------+----------+------------| | | Factory configured - do not | S1/5 | N/A | | | alter | | | |---+--------------------------------+----------+------------| |>> | External BIOS enabled | S1/6 | off | |---+--------------------------------+----------+------------| | | Internal BIOS enabled | S1/6 | on | |---+--------------------------------+----------+------------| |>> | Factory configured - do not | S1/7 | N/A | | | alter | | | |---+--------------------------------+----------+------------| |>> | Factory configured - do not | S1/8 | N/A | | | alter | | | |---+--------------------------------+----------+------------| |>> | Factory configured - do not | SW1/4 | on | | | alter | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | BASE MEMORY ADDRESS SELECT | |------------------------------------------------------------| | Address | S1/1 | S1/2 | |------------------------+-----------------+-----------------| |>> | CC000h | on | off | |---+--------------------+-----------------+-----------------| | | D8000h | off | on | |---+--------------------+-----------------+-----------------| | | DC000h | off | off | |---+--------------------+-----------------+-----------------| | | Disabled | on | on | +------------------------------------------------------------+ +------------------------------------------------------------+ | BIOS SIZE | |------------------------------------------------------------| | Size | E2 | S1/3 | |-------------------------+-------------------+--------------| |>> | 8KB | open | on | |----------+--------------+-------------------+--------------| | | 16KB | closed | off | |------------------------------------------------------------| | Note: The manufacturer recommends that the default | | value of 8KB should not be changed by the user. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DATA TRANSFER RATE TABLE | |------------------------------------------------------------| | | CPU Speed/Type | | |--------------+----------------+----------------------------| | Setting | 25/DX2-50 MHz | 33/DX-66 MHz | 50MHz | |--------------+----------------+---------------+------------| | 0 | 1.67 | 2.22 | 3.33 | |--------------+----------------+---------------+------------| | 1 | 2.00 | 2.66 | 4.00 | |--------------+----------------+---------------+------------| | 2 | 2.50 | 3.33 | 5.00 | |--------------+----------------+---------------+------------| | 3 | 2.94 | 3.92 | 5.88 | |--------------+----------------+---------------+------------| | 4 | 3.12 | 4.60 | 6.25 | |--------------+----------------+---------------+------------| | 5 | 4.16 | 5.55 | 8.33 | |--------------+----------------+---------------+------------| | 6 | 4.54 | 6.06 | 9.09 | |--------------+----------------+---------------+------------| | 7 | 6.25 | 8.33 | 12.50 | +------------------------------------------------------------+ +------------------------------------------------------------+ | DATA TRANSFER RATE SWITCH SETTINGS | |------------------------------------------------------------| | Setting | SW1/1 | SW1/2 | SW1/3 | |---------------+---------------+--------------+-------------| | 0 | on | on | on | |---------------+---------------+--------------+-------------| | 1 | on | on | off | |---------------+---------------+--------------+-------------| | 2 | on | off | on | |---------------+---------------+--------------+-------------| | 3 | on | off | off | |---------------+---------------+--------------+-------------| | 4 | off | on | on | |---------------+---------------+--------------+-------------| | 5 | off | on | off | |---------------+---------------+--------------+-------------| | 6 | off | off | on | |---------------+---------------+--------------+-------------| | 7 | off | off | off | +------------------------------------------------------------+