TOOLMAKER, INC.
===============

   TIE-1200

   +------------------------------------------------------------+
   |------------------------------------------------------------|
   | Data bus:                | 16-bit, ISA                     |
   |--------------------------+---------------------------------|
   | Size:                    | Full-length, full-height card   |
   |--------------------------+---------------------------------|
   | Hard drive supported:    | Up to seven SCSI devices        |
   |--------------------------+---------------------------------|
   | Floppy drives supported: | None                            |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/c/S-T/20425-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                    Function                     | Location |
   |-------------------------------------------------+----------|
   | 4-pin connector - Drive active LED              |   CN1    |
   |-------------------------------------------------+----------|
   | 4-pin RJ11 Chipcard Reader connector - internal |   CN2    |
   |-------------------------------------------------+----------|
   | 50-pin SCSI connector - internal                |   CN3    |
   |-------------------------------------------------+----------|
   | 4-pin RJ11 Chipcard Reader connector - external |   CN4    |
   |-------------------------------------------------+----------|
   | 50-pin SCSI connector - external                |   CN5    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |            Function            |   Location   |  Setting   |
   |--------------------------------+--------------+------------|
   |>> | I/O port address is 310h   | J1/switch 1  |     on     |
   |---+----------------------------+--------------+------------|
   |   | I/O port address is 350h   | J1/switch 1  |    off     |
   |---+----------------------------+--------------+------------|
   |>> | TTL Chipcard Reader        | J2/jumpers 1 | pins 1 & 2 |
   |   | enabled                    |     - 6      |   closed   |
   |---+----------------------------+--------------+------------|
   |   | RS-232 Chipcard Reader     | J2/jumpers 1 | pins 2 & 3 |
   |   | enabled                    |     - 6      |   closed   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        STATUS LEDS                         |
   |------------------------------------------------------------|
   |           Status           | LED 4 | LED 3 | LED 2 | LED 1 |
   |----------------------------+-------+-------+-------+-------|
   |    Reset after power on    |  on   |  on   |  on   |  on   |
   |----------------------------+-------+-------+-------+-------|
   |          RAM test          |  on   |  on   |  on   |  off  |
   |----------------------------+-------+-------+-------+-------|
   |       DES chip test        |  on   |  on   |  off  |  on   |
   |----------------------------+-------+-------+-------+-------|
   |   Internal software test   |  on   |  on   |  off  |  off  |
   |----------------------------+-------+-------+-------+-------|
   | TIE-1200 in download mode  |  on   |  off  |  on   |  on   |
   |----------------------------+-------+-------+-------+-------|
   |  Download mode (service)   |  on   |  off  |  on   |  off  |
   |----------------------------+-------+-------+-------+-------|
   |  Wrong transaction number  |  on   |  off  |  off  |  on   |
   |----------------------------+-------+-------+-------+-------|
   |  Download post processing  |  on   |  off  |  off  |  off  |
   |----------------------------+-------+-------+-------+-------|
   |   Internal program start   |  off  |  on   |  on   |  on   |
   |----------------------------+-------+-------+-------+-------|
   |      Software loaded       |  off  |  on   |  on   |  off  |
   |----------------------------+-------+-------+-------+-------|
   | TIE diagnostic information |  off  |  on   |  off  |  on   |
   |----------------------------+-------+-------+-------+-------|
   | TIE diagnostic information |  off  |  on   |  off  |  off  |
   |----------------------------+-------+-------+-------+-------|
   | TIE diagnostic information |  off  |  off  |  on   |  on   |
   |----------------------------+-------+-------+-------+-------|
   | TIE diagnostic information |  off  |  off  |  on   |  off  |
   |----------------------------+-------+-------+-------+-------|
   |     TIE-1200 installed     |  off  |  off  |  off  |  on   |
   |       (blinking LED)       |       |       |       |       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   | J1/switches 2 - 4 are factory-configured to "on" position  |
   |                      - do not alter.                       |
   +------------------------------------------------------------+