SYMBIOS LOGIC
=============

   NCR8250S

   +------------------------------------------------------------+
   |------------------------------------------------------------|
   | Data bus:                | 32-bit, PCI                     |
   |--------------------------+---------------------------------|
   | Size:                    | Half-length, full-height card   |
   |--------------------------+---------------------------------|
   | Hard drive supported:    | Up to 15 SCSI interface drives  |
   |--------------------------+---------------------------------|
   | Floppy drives supported: | None                            |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/c/S-T/20635-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                   Function                    |  Location  |
   |-----------------------------------------------+------------|
   | 50-pin low-density SCSI interface - internal  |     J2     |
   |-----------------------------------------------+------------|
   | 50-pin high-density SCSI interface - external |     J3     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |           Function            |   Location   |   Setting   |
   |-------------------------------+--------------+-------------|
   | SCSI single-ended active      |      E1      |   closed    |
   | termination - enabled         |              |             |
   |-------------------------------+--------------+-------------|
   | SCSI single-ended active      |      E1      |    open     |
   | termination - disabled        |              |             |
   |------------------------------------------------------------|
   |   Note:You must disable SCSI termination when connecting   |
   |   both internal & external SCSI    interfaces.             |
   +------------------------------------------------------------+