STORAGE DIMENSIONS ================== SDC1602A Card Type Hard drive controller Hard Drives Up to 7 SCSI-1 devices supported Floppy drives Two 360KB, 720KB, 1.2MB, or 1.44MB drives supported Data Bus 16-bit ISA Card Size Half-length, full-height +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | Function | Location | |-------------------+----------+------------------+----------| | 50-pin SCSI | CN1 | 4-pin connector | CN4 | | connector - | | - drive active | | | external | | LED | | |-------------------+----------+------------------+----------| | 50-pin SCSI | CN2 | SCSI active LED | CN5 | | connector - | | | | | internal | | | | |-------------------+----------+------------------+----------| | 34-pin cable | CN3 | | | | connector - | | | | | floppy drive | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |-----------------------------------------+-------+----------| |>> | Factory configured - do not alter | J5/1 | Open | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J5/2 | Closed | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J5/3 | Open | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J5/4 | Open | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J5/5 | Closed | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J5/6 | Closed | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J5/7 | Open | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J5/8 | Open | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J6/4 | Open | | | (Interrupt selection) | | | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J6/5 | Closed | | | (Interrupt selection) | | | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J6/6 | Open | | | (DMA selection) | | | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J6/7 | Open | | | (DMA selection) | | | |---+-------------------------------------+-------+----------| |>> | SCSI parity check disabled | J6/8 | Open | |---+-------------------------------------+-------+----------| | | SCSI parity check enabled | J6/8 | Closed | |---+-------------------------------------+-------+----------| |>> | Floppy drive interface enabled | J7/1 | Closed | |---+-------------------------------------+-------+----------| | | Floppy drive interface disabled | J7/1 | Open | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J7/2 | Closed | | | (DMA 2 or 3 selection) | | | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J7/3 | Open | | | (DMA 2 or 3 selection) | | | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J7/4 | Closed | | | (DMA 2 or 3 selection) | | | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J7/5 | Open | | | (DMA 2 or 3 selection) | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS (CON'T) | |------------------------------------------------------------| | Function | Label | Position | |-----------------------------------------+-------+----------| |>> | Floppy drive dual speed enabled | J7/8 | Closed | |---+-------------------------------------+-------+----------| | | Floppy drive dual speed disabled | J7/8 | Open | |---+-------------------------------------+-------+----------| |>> | Primary I/O port address 340h | J9/5 | Open | | | enabled | | | |---+-------------------------------------+-------+----------| | | Secondary I/O port address 140h | J9/5 | Closed | | | enabled | | | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J9/6 | Closed | | | (BIOS address selection) | | | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | J9/7 | Closed | | | (BIOS address selection) | | | |---+-------------------------------------+-------+----------| |>> | SCSI BIOS enabled | J9/8 | Closed | |---+-------------------------------------+-------+----------| | | SCSI BIOS disabled | J9/8 | Open | |------------------------------------------------------------| | Note:Disable BIOS when SDC1602A is a secondary card | | in the system. | +------------------------------------------------------------+ +------------------------------------------------------------+ | SCSI ID SELECTION | |------------------------------------------------------------| | SCSI ID | J6/1 | J6/2 | J6/3 | |-----------------+--------------+-------------+-------------| |>> | 7 | Closed | Closed | Closed | |------------------------------------------------------------| | Note:Other settings are unidentified. | +------------------------------------------------------------+ +---------------------------------------------------------------+ | DMA CHANNEL SELECTION | |---------------------------------------------------------------| |Channel| J8/1 | J8/2 | J8/3 | J8/4 | J8/5 | J8/6 | J8/7 | J8/8 | |-------+------+------+------+------+------+------+------+------| |>> | 0 | Open | Open | Open |Closed| Open | Open | Open |Closed| |---+---+------+------+------+------+------+------+------+------| | | 5 | Open | Open |Closed| Open | Open | Open |Closed| Open | |---+---+------+------+------+------+------+------+------+------| | | 6 | Open |Closed| Open | Open | Open |Closed| Open | Open | |---+---+------+------+------+------+------+------+------+------| | | 7 |Closed| Open | Open | Open |Closed| Open | Open | Open | +---------------------------------------------------------------+ +------------------------------------------------------------+ | FLOPPY DRIVE INTERRUPT SELECTION | |------------------------------------------------------------| | IRQ | J7/6 | J7/7 | |-----------------------+------------------+-----------------| |>> | IRQ6 | Closed | Open | |-----+-----------------+------------------+-----------------| | | IRQ10 | Open | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT SELECTION | |------------------------------------------------------------| | IRQ | J9/1 | J9/2 | J9/3 | J9/4 | |--------------+-----------+-----------+----------+----------| | | IRQ9 | Open | Open | Open | Closed | |---+----------+-----------+-----------+----------+----------| | | IRQ10 | Open | Open | Closed | Open | |---+----------+-----------+-----------+----------+----------| |>> | IRQ11 | Open | Closed | Open | Open | |---+----------+-----------+-----------+----------+----------| | | IRQ12 | Closed | Open | Open | Open | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | Remove terminating resistors when connecting external and | | internal devices. | +------------------------------------------------------------+