STORAGE DIMENSIONS
==================

   SDC3222F

   Card Type            Hard drive controller                     
   Hard Drives          Up to 7 SCSI-2 Fast devices               
   Supported            
   Floppy Drives        Two 360KB, 720KB, 1.2MB, or 1.44MB drives 
   Supported            
   Data Bus             32-bit EISA                               
   Card Size            Half length, full height                  

<gopher://bitreich.org/I/th99/c/S-T/21467-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |  Function   | Location |        Function        | Location |
   |-------------+----------+------------------------+----------|
   | 50-pin SCSI |   CN1    | 34-pin cable connector |   CN3    |
   | connector - |          | - floppy drive         |          |
   | external    |          |                        |          |
   |-------------+----------+------------------------+----------|
   | 50-pin SCSI |   CN2    | 4-pin connector -      |   CN5    |
   | connector - |          | drive active LED       |          |
   | internal    |          |                        |          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |                Function                | Label | Position  |
   |----------------------------------------+-------+-----------|
   | Floppy drive enabled                   |  JP1  |  Closed   |
   |----------------------------------------+-------+-----------|
   | Floppy drive disabled                  |  JP1  |   Open    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    DIAGNOSTIC LED (CN4)                    |
   |------------------------------------------------------------|
   |    Color     |   Status   |           Condition            |
   |--------------+------------+--------------------------------|
   | Unidentified |     On     |      Terminators missing       |
   |--------------+------------+--------------------------------|
   | Unidentified |  1 flash   |         EPROM failure          |
   |--------------+------------+--------------------------------|
   | Unidentified | 2 flashes  |       Local RAM failure        |
   |--------------+------------+--------------------------------|
   | Unidentified | 3 flashes  | SCSI chip or interface failure |
   |--------------+------------+--------------------------------|
   | Unidentified | 4 flashes  |   Internal data bus failure    |
   |--------------+------------+--------------------------------|
   | Unidentified | 5 flashes  |  Internal address bus failure  |
   |--------------+------------+--------------------------------|
   | Unidentified | 6 flashes  |    Bus master chip failure     |
   |--------------+------------+--------------------------------|
   | Unidentified |  Blinking  |           Fuse blown           |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   | Remove terminating resistors only when using internal and  |
   | external devices at the same time.                         |
   +------------------------------------------------------------+