UNIDENTIFIED ============ IDE/FDC MULTI I-O +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 16-bit, ISA | |-------------------+----------------------------------------| | Size: | Half-length, full-height card | |-------------------+----------------------------------------| | Hard drive | Two IDE (AT) Interface drives | | supported: | | |-------------------+----------------------------------------| | Floppy drives | Two 360KB, 720KB, 1.2MB, or 1.44MB | | supported: | drives | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-------------------------------------------------+----------| | 25 pin parallel port-external | CN1 | |-------------------------------------------------+----------| | 10 pin serial port 1-internal | CN2 | |-------------------------------------------------+----------| | 10 pin serial port 2-internal | CN3 | |-------------------------------------------------+----------| | 40 pin IDE(AT) interface connector | CN4 | |-------------------------------------------------+----------| | 34 pin data cable connector-floppy drive | CN5 | | interface | | |-------------------------------------------------+----------| | 2 pin connector-drive active LED | LED | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Purpose | Jumper | Setting | |--------------------------------------+--------+------------| |>> | Floppy drive interface enabled | JP1 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| | | Floppy drive interface disabled | JP1 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Parallel port address LPT2 | JP2 | pins 1 & 2 | | | select | | closed | |---+----------------------------------+--------+------------| | | Parallel port address LPT3 | JP2 | pins 2 & 3 | | | select | | closed | |---+----------------------------------+--------+------------| |>> | Serial port 1 address select | JP3 | pins 1 & 2 | | | 3F8h | | closed | |---+----------------------------------+--------+------------| | | Serial port 1 address select | JP3 | pins 2 & 3 | | | 3E8h | | closed | |---+----------------------------------+--------+------------| |>> | Serial port 2 address select | JP4 | pins 1 & 2 | | | 2F8h | | closed | |---+----------------------------------+--------+------------| | | Serial port 2 address select | JP4 | pins 2 & 3 | | | 2E8h | | closed | |---+----------------------------------+--------+------------| |>> | Hard Drive interface enabled | JP5 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| | | Hard Drive interface disabled | JP5 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Factory configured-do not alter | JP6 | pins 1 & 2 | | | | | closed | +------------------------------------------------------------+