UNIDENTIFIED
============

   TD1010

   +------------------------------------------------------------+
   |------------------------------------------------------------|
   | Data bus:     | 16-bit, ISA                                |
   |---------------+--------------------------------------------|
   | Size:         | Half-length, full-height card              |
   |---------------+--------------------------------------------|
   | Hard drive    | Two IDE(AT) or one IDE(XT) Interface       |
   | supported:    | drives                                     |
   |---------------+--------------------------------------------|
   | Floppy drives | Two 360KB, 720KB, 1.2MB, or 1.44MB drives  |
   | supported:    |                                            |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/c/U-Z/20757-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                  Function                   |   Location   |
   |---------------------------------------------+--------------|
   | Game port                                   |     CN1      |
   |---------------------------------------------+--------------|
   | 40-pin IDE(AT) Interface connector          |     CN2      |
   |---------------------------------------------+--------------|
   | 34-pin control cable connector-floppy drive |     CN3      |
   |---------------------------------------------+--------------|
   | 10-pin serial port (COM2/4) - internal      |     CN4      |
   |---------------------------------------------+--------------|
   | 10-pin serial port (COM1/3) - external      |     CN5      |
   |---------------------------------------------+--------------|
   | 25-pin parallel port (LPT1/2) - external    |     CN6      |
   |---------------------------------------------+--------------|
   | 2-pin connector - Drive active LED          |     JP1      |
   +------------------------------------------------------------+

   t

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |             Function             | Location |   Setting    |
   |----------------------------------+----------+--------------|
   |>> | Serial port 1 enabled        |   JP2    |  pins 1 & 2  |
   |   |                              |          |    closed    |
   |---+------------------------------+----------+--------------|
   |   | Serial port 1 disabled       |   JP2    |  pins 2 & 3  |
   |   |                              |          |    closed    |
   |---+------------------------------+----------+--------------|
   |>> | Game port enabled            |   JP3    |  pins 1 & 2  |
   |   |                              |          |    closed    |
   |---+------------------------------+----------+--------------|
   |   | Game port disabled           |   JP3    |  pins 2 & 3  |
   |   |                              |          |    closed    |
   |---+------------------------------+----------+--------------|
   |>> | Floppy drive enabled         |   JP4    |  pins 1 & 2  |
   |   |                              |          |    closed    |
   |---+------------------------------+----------+--------------|
   |   | Floppy drive disabled        |   JP4    |  pins 2 & 3  |
   |   |                              |          |    closed    |
   |---+------------------------------+----------+--------------|
   |>> | Parallel port address = 378h |   JP5    |  pins 1 & 2  |
   |   |                              |          |    closed    |
   |---+------------------------------+----------+--------------|
   |   | Parallel port address = 278h |   JP5    |  pins 2 & 3  |
   |   |                              |          |    closed    |
   |---+------------------------------+----------+--------------|
   |>> | IDE interface enabled        |   JP6    |  pins 1 & 2  |
   |   |                              |          |    closed    |
   |---+------------------------------+----------+--------------|
   |   | IDE interface disabled       |   JP6    |  pins 2 & 3  |
   |   |                              |          |    closed    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |           Function           | Location |     Setting      |
   |------------------------------+----------+------------------|
   |>> | Serial port 2 enabled    |   JP7    |    pins 1 & 2    |
   |   |                          |          |      closed      |
   |---+--------------------------+----------+------------------|
   |   | Serial port 2 disabled   |   JP7    |    pins 2 & 3    |
   |   |                          |          |      closed      |
   |---+--------------------------+----------+------------------|
   |>> | Hard drive installed     |   JP8    |    pins 2 & 3    |
   |   |                          |          |      closed      |
   |---+--------------------------+----------+------------------|
   |   | Hard drive not installed |   JP8    |    pins 1 & 2    |
   |   |                          |          |      closed      |
   +------------------------------------------------------------+