DIGI INTERNATIONAL, INC. ======================== SYNCPORT/X25R Card Type X.25 Serial Processor IDT R3051 Processor Speed 20MHz Chipset Unidentified Maximum Onboard Memory 1MB dual-ported RAM/256KB DRAM I/O Options Serial ports (2) Data Bus 16-bit ISA +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------------------+-------+---------------------+-------| | V.11, V.24, V.35, or | CN1 | V.11, V.24, V.35, | CN2 | | V.36 serial port 1 | | or V.36 serial port | | | via DB-15 connector | | 2 via DB-15 | | | | | connector | | |------------------------------------------------------------| | Note: Standard serial ports are provided on included | | adapter cables. | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |---------------------------------------+-------+------------| |>> | Factory configured - do not alter | J1 | Pins 1 & 2 | | | | | closed | |---+-----------------------------------+-------+------------| |>> | Factory configured - do not alter | SW1/4 | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | BASE I/O ADDRESS SELECTION | |------------------------------------------------------------| | Setting | SW1/1 | SW1/2 | SW1/3 | |---------------+--------------+--------------+--------------| | 118h | Off | On | Off | |---------------+--------------+--------------+--------------| | 128h | Off | On | On | |---------------+--------------+--------------+--------------| | 208h | On | Off | Off | |---------------+--------------+--------------+--------------| | 228h | On | Off | On | |---------------+--------------+--------------+--------------| | 308h | On | On | Off | |---------------+--------------+--------------+--------------| | 328h | On | On | On | +------------------------------------------------------------+ X.25 Command Set +------------------------------------------------------------+ | BREAK | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | BREAK | |---------------+--------------------------------------------| | Abbreviation: | B | |---------------+--------------------------------------------| | Description: | Sends a break signal to the remote system. | +------------------------------------------------------------+ +------------------------------------------------------------+ | BREAK ACTION | |------------------------------------------------------------| | Type: | Configuration | |---------------+--------------------------------------------| | Format: | BREAKACTION n | |---------------+--------------------------------------------| | Abbreviation: | BRA | |---------------+--------------------------------------------| | Description: | Sets the PAD's response to an issued break | | | command. | |---------------+--------------------------------------------| | Command | Function | |---------------+--------------------------------------------| | BRA 0 | No action taken. | |---------------+--------------------------------------------| | BRA 1 | Interrupt signal sent. | |---------------+--------------------------------------------| | BRA 2 | Reset sent. | |---------------+--------------------------------------------| | BRA 5 | Interrupt signal and break indicator sent. | |---------------+--------------------------------------------| | BRA 8 | PAD returned to command mode. | |---------------+--------------------------------------------| | BRA 12 | Interrupt signal and break indicator sent; | | | buffers cleared. | +------------------------------------------------------------+ +------------------------------------------------------------+ | BREAKIN CHARACTER | |------------------------------------------------------------| | Type: | Configuration | |---------------+--------------------------------------------| | Format: | BREAKIN | |---------------+--------------------------------------------| | Abbreviation: | None | |---------------+--------------------------------------------| | Description: | Sets the character used to signal the PAD | | | for a command. The user will be prompted | | | for a new character. | +------------------------------------------------------------+ +------------------------------------------------------------+ | CALL | |------------------------------------------------------------| | Type: | Immediate | |-------------------+----------------------------------------| | | Format: | CALL r . ssss . t . uuuu ~ vvvv p w / | | | | x w y / z fr qmmmm N nnnn T oooo | |---+---------------+----------------------------------------| | | Abbreviation: | C | |---+---------------+----------------------------------------| | | Description: | Calls the X.25 network station | | | | indicated by ssss . | |------------------------------------------------------------| | Note: | | | | Arguments are shown above in italics; command text shown | | in bold. All arguments after r . ssss are optional. | |------------------------------------------------------------| | | Command | Function | |---+---------------+----------------------------------------| | | r =A | Call is placed to subnet A. | |---+---------------+----------------------------------------| | | r =B | Call is placed to subnet B. | |---+---------------+----------------------------------------| |>> | t =N | Address specified by uuuu is an NSAP | | | | address. | |---+---------------+----------------------------------------| | | t =X | Address specified by uuuu is a non-OSI | | | | address. | |---+---------------+----------------------------------------| | | uuuu | Specifies the address to dial. | |---+---------------+----------------------------------------| | | vvvv | Specifies the Call User Data passed to | | | | the remote host. | |---+---------------+----------------------------------------| | | w | Specifies the incoming packet size. | |---+---------------+----------------------------------------| | | x | Specifies the outgoing packet size. | |---+---------------+----------------------------------------| | | y | Specifies the incoming window size. | |---+---------------+----------------------------------------| | | z | Specifies the outgoing window size. | |---+---------------+----------------------------------------| | | f | Enables fast select. | |---+---------------+----------------------------------------| | | r | Requests reversed charges. | |---+---------------+----------------------------------------| | | q =B | Closed User Group specified by mmmm is | | | | bilateral. | |---+---------------+----------------------------------------| | | q =G | Closed User Group specified by mmmm is | | | | multi-user. | |---+---------------+----------------------------------------| | | mmmm | Specifies the Closed User Group to | | | | join. | |---+---------------+----------------------------------------| | | nnnn | Specifies the Network User Identifier | | | | for security and billing. | |---+---------------+----------------------------------------| | | oooo | Specifies the Recognized Private | | | | Operating Agency information. | +------------------------------------------------------------+ +------------------------------------------------------------+ | CLEAR | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | CLEAR | |---------------+--------------------------------------------| | Abbreviation: | CLR | |---------------+--------------------------------------------| | Description: | Terminates the current X.25 connection. | +------------------------------------------------------------+ +------------------------------------------------------------+ | ECHO | |------------------------------------------------------------| | Type: | Configuration | |------------------+-----------------------------------------| | | Format: | ECHO xx | |---+--------------+-----------------------------------------| | | Abbreviation | E | |---+--------------+-----------------------------------------| | | Description: | Selects whether the PAD will echo back | | | | transmitted characters. | |---+--------------+-----------------------------------------| | | Command | Function | |---+--------------+-----------------------------------------| |>> | E ON | Echo enabled. | |---+--------------+-----------------------------------------| | | E OFF | Echo disabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONTROL CHARACTER MASK | |------------------------------------------------------------| | Type: | Configuration | |-------------------+----------------------------------------| | | Format: | EMASK n | |---+---------------+----------------------------------------| | | Abbreviation: | EM | |---+---------------+----------------------------------------| | | Default: | 192 | |---+---------------+----------------------------------------| | | Range: | 0 - 255 | |---+---------------+----------------------------------------| | | Description: | Selects which control characters will | | | | be trapped and not echoed to the | | | | screen. | |---+---------------+----------------------------------------| | | Bit | Value | Function | |---+---------------+-------+--------------------------------| | | 0 | 0 | CR character echoed. | | | | | | | | | 1 | CR character not echoed. | |---+---------------+-------+--------------------------------| | | 1 | 0 | LF character echoed. | | | | | | | | | 1 | LF character not echoed. | |---+---------------+-------+--------------------------------| | | 2 | 0 | VT, HT, and FF characters | | | | | echoed. | | | | 1 | | | | | | VT, HT, and FF characters not | | | | | echoed. | |---+---------------+-------+--------------------------------| | | 3 | 0 | BEL and BS characters echoed. | | | | | | | | | 1 | BEL and BS characters not | | | | | echoed. | |---+---------------+-------+--------------------------------| | | 4 | 0 | ESC and ENQ characters echoed. | | | | | | | | | 1 | ESC and ENQ characters not | | | | | echoed. | |---+---------------+-------+--------------------------------| | | 5 | 0 | ACK, NAK, STX, SOX, EOT, ETB, | | | | | and ETX characters echoed. | | | | 1 | | | | | | ACK, NAK, STX, SOX, EOT, ETB, | | | | | and ETX characters not echoed. | |---+---------------+-------+--------------------------------| | | 6 | 0 | DEL, CAN, DC2 characters | | | | | echoed. | | | | 1 | | | | | | DEL, CAN, DC2 characters not | | | | | echoed. | |---+---------------+-------+--------------------------------| | | 7 | 0 | All other control characters | | | | | echoed. | | | | 1 | | | | | | All other control characters | | | | | not echoed. | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL | |------------------------------------------------------------| | Type: | Configuration | |-------------------+----------------------------------------| | | Format: | FLOW xx | |---+---------------+----------------------------------------| | | Abbreviation: | F | |---+---------------+----------------------------------------| | | Description: | Selects whether the PAD will use | | | | XON/XOFF flow control. | |---+---------------+----------------------------------------| | | Command | Function | |---+---------------+----------------------------------------| |>> | F ON | Flow control enabled. | |---+---------------+----------------------------------------| | | F OFF | Flow control disabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | FORWARDING CHARACTERS | |------------------------------------------------------------| | Type: | Configuration | | |-------------------+--------------------+-------------------| | | Format: | FORWARD n | | |---+---------------+--------------------+-------------------| | | Abbreviation: | FOR | | |---+---------------+--------------------+-------------------| | | Default: | 48 | | |---+---------------+--------------------+-------------------| | | Range: | 0 - 127 | | |---+---------------+--------------------+-------------------| | | Description: | Selects which | | | | | characters will be | | | | | used as forwarding | | | | | characters. | | |---+---------------+--------------------+-------------------| | | Bit | Value | Function | |---+---------------+--------------------+-------------------| | | 0 | 0 | Alphanumeric | | | | | characters not | | | | 1 | used for | | | | | forwarding. | | | | | | | | | | Alphanumeric | | | | | characters used | | | | | for forwarding. | |---+---------------+--------------------+-------------------| | | 1 | 0 | CR not used for | | | | | forwarding. | | | | 1 | | | | | | CR used for | | | | | forwarding. | |---+---------------+--------------------+-------------------| | | 2 | 0 | ESC, BEL, ENQ, | | | | | and ACK not used | | | | 1 | for forwarding. | | | | | | | | | | ESC, BEL, ENQ, | | | | | and ACK used for | | | | | forwarding. | |---+---------------+--------------------+-------------------| | | 3 | 0 | DEL, CAN, and DC2 | | | | | not used for | | | | 1 | forwarding. | | | | | | | | | | DEL, CAN, and DC2 | | | | | used for | | | | | forwarding. | |---+---------------+--------------------+-------------------| | | 4 | 0 | EXT and EOT not | | | | | used for | | | | 1 | forwarding. | | | | | | | | | | EXT and EOT used | | | | | for forwarding. | |---+---------------+--------------------+-------------------| | | 5 | 0 | HT, LF, VT, and | | | | | FF not used for | | | | 1 | forwarding. | | | | | | | | | | HT, LF, VT, and | | | | | FF used for | | | | | forwarding. | |---+---------------+--------------------+-------------------| | | 6 | 0 | All other control | | | | | characters except | | | | 1 | BS, XON, and XOFF | | | | | not used for | | | | | forwarding. | | | | | | | | | | All other control | | | | | characters except | | | | | BS, XON, and XOFF | | | | | used for | | | | | forwarding. | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | INT | |---------------+--------------------------------------------| | Abbreviation: | None | |---------------+--------------------------------------------| | Description: | Sends an interrupt signal to the remote | | | host. | +------------------------------------------------------------+ +------------------------------------------------------------+ | LINE FEED | |------------------------------------------------------------| | Type: | Configuration | | |-------------------+---------------------+------------------| | | Format: | LFINSERT n | | |---+---------------+---------------------+------------------| | | Abbreviation: | LF | | |---+---------------+---------------------+------------------| | | Default: | 6 | | |---+---------------+---------------------+------------------| | | Range: | 0 - 7 | | |---+---------------+---------------------+------------------| | | Description: | Sets when the PAD | | | | | will add line feeds | | | | | to carriage | | | | | returns. | | |---+---------------+---------------------+------------------| | | Bit | Value | Function | |---+---------------+---------------------+------------------| | | 0 | 0 | Line feed not | | | | | added after | | | | 1 | received CR. | | | | | | | | | | Line feed added | | | | | after received | | | | | CR. | |---+---------------+---------------------+------------------| | | 1 | 0 | Line feed not | | | | | added after | | | | 1 | transmitted CR. | | | | | | | | | | Line feed added | | | | | after | | | | | transmitted CR. | |---+---------------+---------------------+------------------| | | 2 | 0 | Line feed not | | | | | added after | | | | 1 | echoed CR. | | | | | | | | | | Line feed added | | | | | after echoed CR. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LOGGING | |------------------------------------------------------------| | Type: | Immediate | |-------------------+----------------------------------------| | | Format: | LOGHOST xx | |---+---------------+----------------------------------------| | | Abbreviation: | LOG | |---+---------------+----------------------------------------| | | Description: | Configures the PAD to display all X.29 | | | | messages in hexadecimal dump format | | | | for diagnostic purposes. In each pair | | | | of two-digit hexadecimal numbers | | | | displayed, the first is the parameter | | | | and the second is the value it was set | | | | to. | |---+---------------+----------------------------------------| | | Command | Function | |---+---------------+----------------------------------------| |>> | LOG off | X.29 logging disabled. | |---+---------------+----------------------------------------| | | LOG on | X.29 logging enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MODE - MESSAGE | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | MESSAGE | |---------------+--------------------------------------------| | Abbreviation: | MES | |---------------+--------------------------------------------| | Description: | Commands the PAD to enter message mode. | |------------------------------------------------------------| | Note: | | | | This is the default mode of operation. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MODE - NATIVE | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | NATIVE | |---------------+--------------------------------------------| | Abbreviation: | NAT | |---------------+--------------------------------------------| | Description: | Commands the PAD to enter native mode. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MODE - TRANSPARENT | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | TRANSPARENT | |---------------+--------------------------------------------| | Abbreviation: | TRA | |---------------+--------------------------------------------| | Description: | Commands the PAD to enter transparent | | | mode. | +------------------------------------------------------------+ +------------------------------------------------------------+ | PAGE WAIT | |------------------------------------------------------------| | Type: | Configuration | |---------------+--------------------------------------------| | Format: | PAGEWAIT n | |---------------+--------------------------------------------| | Abbreviation: | PW | |---------------+--------------------------------------------| | Description: | Sets the number of lines the PAD will | | | display before pausing and waiting for the | | | user to press the space bar. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DISPLAY PARAMETER | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | PARAM? a , b , c , d ... | |---------------+--------------------------------------------| | Abbreviation: | PAR? | |---------------+--------------------------------------------| | Description: | Displays the settings for the X.3 | | | parameters listed. If no parameters are | | | given, the entire configuration will be | | | displayed. | +------------------------------------------------------------+ +------------------------------------------------------------+ | TERMINAL TYPE - PRINTER | |------------------------------------------------------------| | Type: | Configuration | |---------------+--------------------------------------------| | Format: | PRINTER | |---------------+--------------------------------------------| | Abbreviation: | PRT | |---------------+--------------------------------------------| | Description: | Configures the PAD for a printer terminal | | | type. | +------------------------------------------------------------+ +------------------------------------------------------------+ | TERMINAL TYPE - VIDEO | |------------------------------------------------------------| | Type: | Configuration | |---------------+--------------------------------------------| | Format: | VDU | |---------------+--------------------------------------------| | Abbreviation: | None | |---------------+--------------------------------------------| | Description: | Configures the PAD for a video display | | | terminal type. | +------------------------------------------------------------+ +------------------------------------------------------------+ | TERMINAL PROFILE | |------------------------------------------------------------| | Type: | Configuration | |---------------+--------------------------------------------| | Format: | PROFILE xx | |---------------+--------------------------------------------| | Abbreviation: | PROF | |---------------+--------------------------------------------| | Description: | Sets the terminal options according to the | | | profile specified. | +------------------------------------------------------------+ +------------------------------------------------------------+ | RESET | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | RESET | |---------------+--------------------------------------------| | Abbreviation: | RST | |---------------+--------------------------------------------| | Description: | Sends a reset signal to the remote host. | +------------------------------------------------------------+ +------------------------------------------------------------+ | SET PARAMETER | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | SET a : x , b : y , c : z ... | | | | | | SET? a : x , b : y , c : z ... | |---------------+--------------------------------------------| | Abbreviation: | None | |---------------+--------------------------------------------| | Description: | Sets parameter a to x , parameter b to y , | | | and so on. The second form will return the | | | same output as if a PAR command had been | | | issued with those parameters as arguments. | | | If an illegal value is entered, the PAD | | | will return PAR p :INV where p is the | | | parameter with the illegal value. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DISPLAY STATUS | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | STATUS xx | |---------------+--------------------------------------------| | Abbreviation: | STAT | |---------------+--------------------------------------------| | Description: | Displays current connection statistics. | |---------------+--------------------------------------------| | Command | Function | |---------------+--------------------------------------------| | STAT | Displays information about the current | | | connection only. | |---------------+--------------------------------------------| | STAT all | Displays information about the current | | | connection and settings for that | | | connection. | +------------------------------------------------------------+ +------------------------------------------------------------+ | SCREEN WIDTH | |------------------------------------------------------------| | Type: | Configuration | |---------------+--------------------------------------------| | Format: | WIDTH n | |---------------+--------------------------------------------| | Abbreviation: | WID | |---------------+--------------------------------------------| | Default: | 80 | |---------------+--------------------------------------------| | Range: | 20 - 255 | |---------------+--------------------------------------------| | Unit: | 1 character | |---------------+--------------------------------------------| | Description: | Sets the character width of the terminal | | | for line wrap. | +------------------------------------------------------------+