DIALOGIC CORPORATION ==================== VFX/PCI Card Type Voice processor card Chip Set Motorola Maximum Onboard Unidentified Memory I/O Options RJ-11 jacks (4), CTbus interface, 52-pin connector, 20-pin connectors (2) Data Bus 32-bit PCI Card Size Full-length, full-height +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |---------------------+-------+----------------------+-------| | CTbus interface | CN1 | Channel 4 via RJ-11 | J4 | |---------------------+-------+----------------------+-------| | Channel 1 via RJ-11 | J1 | 52-pin fax daughter | J5 | | | | card connector | | |---------------------+-------+----------------------+-------| | Channel 2 via RJ-11 | J2 | 20-pin fax daughter | J6 | | | | card connector | | |---------------------+-------+----------------------+-------| | Channel 3 via RJ-11 | J3 | 20-pin fax daughter | J7 | | | | card connector | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |-----------------------------------------+-------+----------| | Board ID selection | SW1 | See note | |-----------------------------------------+-------+----------| |>> Hook switch set for on hook operation | SW2/1 | Off | |-----------------------------------------+-------+----------| | Hook switch set to off hook operation | SW2/1 | On | |-----------------------------------------+-------+----------| |>> Board ID range set to 0 - 15 | SW2/2 | Off | |-----------------------------------------+-------+----------| | Board ID range set to 16 - 31 | SW2/2 | On | |------------------------------------------------------------| | Note: SW1 is a rotary switch used to determine the Board | | ID settings. The default Board ID setting is 0. | | | | SW1 is used in concurrence with SW2/2. | +------------------------------------------------------------+ +------------------------------------------------------------+ | BOARD TERMINATION SETTINGS | |------------------------------------------------------------| | Setting | JP2 | JP3 | JP4 | JP5 | |------------------------+--------+--------+--------+--------| |>> Termination disabled | Open | Open | Open | Open | |------------------------+--------+--------+--------+--------| | Termination enabled | Closed | Closed | Closed | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | CTBUS CLOCK SIGNAL SETTINGS | |------------------------------------------------------------| | Setting | JP6 | JP7 | |-------------------+-------------------+--------------------| | SCbus | Pins 1 & 2 closed | Pins 1 & 2 closed | |-------------------+-------------------+--------------------| | MVIP | Pins 2 & 3 closed | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+--------------+--------+------------------------------| | CR5 | Unidentified | On | The card is receiving power | |-----+--------------+--------+------------------------------| | CR5 | Unidentified | Off | The card is not receiving | | | | | power | +------------------------------------------------------------+