QUATECH, INC.
=============

   RW-100T

   Card Type          I/O controller                              
   Chipset/Controller Unidentified UART                           
   I/O Options        Serial ports (2)                            
   Maximum DRAM       N/A                                         

<gopher://bitreich.org/I/th99/i/P-R/50354-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |      Purpose      | Location |     Purpose      | Location |
   |-------------------+----------+------------------+----------|
   | Serial port 1     |   CN1    | Serial port 2    |   CN2    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     CLOCK SPEED SELECT                     |
   |------------------------------------------------------------|
   |          Speed           |               J1                |
   |--------------------------+---------------------------------|
   |>> |        18.432        |        Pins 2 & 5 closed        |
   |---+----------------------+---------------------------------|
   |   |        9.216         |    Pins 1 & 2, 5 & 6 closed     |
   |---+----------------------+---------------------------------|
   |   |        3.6864        |    Pins 2 & 3, 4 & 5 closed     |
   |---+----------------------+---------------------------------|
   |   |        1.8432        | Pins 1 & 2, 3 & 6, 4 & 5 closed |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              PRIMARY PORT I/O ADDRESS SELECT               |
   |------------------------------------------------------------|
   |   Address    |          SW1          |         SW3         |
   |--------------+-----------------------+---------------------|
   |>>  |  03F8h  |  1 & 2, 3 & 4, 5 & 6  |        6 on         |
   |    |         |          on           |                     |
   |----+---------+-----------------------+---------------------|
   |    |  03E8h  |  1 & 2, 3 & 4, 5 & 6  |      4 & 6 on       |
   |    |         |          on           |                     |
   |----+---------+-----------------------+---------------------|
   |    |  3220h  |  1 & 2, 5 & 6, 8 on   | 1 & 2, 4 & 5, 6 on  |
   |------------------------------------------------------------|
   |   Note:The address range for the RW-100T is from 0 to      |
   |   FFFFh. The switches are a binary representation of the   |
   |   addresses. The switches have the following decimal       |
   |   values: SW1/1=8, SW1/2=4, SW1/3=2, SW1/4=1, SW1/5=8,     |
   |   SW1/6=4, SW1/7=2, SW1/8=1, SW3/1=8, SW3/2=4, SW3/3=2,    |
   |   SW3/4=1, SW3/5=8.                                        |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |             SECONDARY PORT I/O ADDRESS SELECT              |
   |------------------------------------------------------------|
   |   Address    |           SW2           |        SW4        |
   |--------------+-------------------------+-------------------|
   |>>  |  02F8h  |  1 & 2, 3 & 4, 5 &6, 8  |       6 on        |
   |    |         |           on            |                   |
   |----+---------+-------------------------+-------------------|
   |    |  02E8h  | 1 & 2, 3 & 4, 5 & 6, 8  |     4 & 6 on      |
   |    |         |           on            |                   |
   |----+---------+-------------------------+-------------------|
   |    |  5228h  |   1 & 3, 5 & 6, 8 on    |  1 & 2, 4 & 6 on  |
   |------------------------------------------------------------|
   |   Note:The address range for the RW-100T is from 0 to      |
   |   FFFFh. The switches are a binary representations of the  |
   |   addresses. The switches have the following decimal       |
   |   values: SW2/1=8, SW2/2=4, SW2/3=2, SW2/4=1, SW2/5=8,     |
   |   SW2/6=4, SW2/7=2, SW2/8=1, SW4/1=8, SW4/2=4, SW4/3=2,    |
   |   SW4/4=1, SW4/5=8.                                        |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      INTERRUPT SELECT                      |
   |------------------------------------------------------------|
   |      IRQ       |     J3 (Port 1)     |     J4 (Port 2)     |
   |----------------+---------------------+---------------------|
   |      IRQ2      | Pins 1 & 12 closed  | Pins 1 & 12 closed  |
   |----------------+---------------------+---------------------|
   |      IRQ3      | Pins 2 & 13 closed  | Pins 2 & 13 closed  |
   |----------------+---------------------+---------------------|
   |      IRQ4      | Pins 3 & 14 closed  | Pins 3 & 14 closed  |
   |----------------+---------------------+---------------------|
   |      IRQ5      | Pins 4 & 15 closed  | Pins 4 & 15 closed  |
   |----------------+---------------------+---------------------|
   |      IRQ6      | Pins 5 & 16 closed  | Pins 5 & 16 closed  |
   |----------------+---------------------+---------------------|
   |      IRQ7      | Pins 6 & 17 closed  | Pins 6 & 17 closed  |
   |----------------+---------------------+---------------------|
   |     IRQ10      | Pins 7 & 18 closed  | Pins 7 & 18 closed  |
   |----------------+---------------------+---------------------|
   |     IRQ11      | Pins 8 & 19 closed  | Pins 8 & 19 closed  |
   |----------------+---------------------+---------------------|
   |     IRQ12      | Pins 9 & 20 closed  | Pins 9 & 20 closed  |
   |----------------+---------------------+---------------------|
   |     IRQ14      | Pins 10 & 21 closed | Pins 10 & 21 closed |
   |----------------+---------------------+---------------------|
   |     IRQ15      | Pins 11 & 22 closed | Pins 11 & 22 closed |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |         SECONDARY SERIAL PORT OUTPUT CONFIGURATION         |
   |------------------------------------------------------------|
   |        Output        |    Protocol Selectors Installed     |
   |----------------------+-------------------------------------|
   |     RS-232C DTE      |              SB1 & SB4              |
   |----------------------+-------------------------------------|
   |     RS-232C DCE      |              SB1 & SB5              |
   |----------------------+-------------------------------------|
   |        RS-485        |              SB2 & SB3              |
   |------------------------------------------------------------|
   |   Note:These settings are valid only when no protocol      |
   |   selectors are installed on any jumpers other than those  |
   |   indicated. Incorrect combinations of these selectors may |
   |   result in card or system damage.                         |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |         PRIMARY SERIAL PORT DTE/DCE CONFIGURATION          |
   |------------------------------------------------------------|
   |                      Serial Port CN1                       |
   |------------------------------------------------------------|
   |                         Jumper J6                          |
   |                                                            |
<gopher://bitreich.org/I/th99/i/P-R/50354-2.png>
   |                                                    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |        SECONDARY SERIAL PORT DTE/DCE CONFIGURATION         |
   |------------------------------------------------------------|
   |                      Serial Port CN2                       |
   |------------------------------------------------------------|
   |                     Jumpers SB1 - SB5                      |
   |                                                            |
<gopher://bitreich.org/I/th99/i/P-R/50354-3.png>
   |                                                    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                AUXILIARY I/O CONFIGURATION                 |
   |------------------------------------------------------------|
   |            Function             |            J5            |
   |---------------------------------+--------------------------|
   |        RTS/CTS loopback         |    Pins 3 & 6 closed     |
   |---------------------------------+--------------------------|
   |          Transmit RTS           |    Pins 2 & 3 closed     |
   |---------------------------------+--------------------------|
   |           Receive CTS           |    Pins 5 & 6 closed     |
   |---------------------------------+--------------------------|
   |       RCLK/XCLK loopback        |    Pins 1 & 4 closed     |
   |---------------------------------+--------------------------|
   |          Transmit XCLK          |    Pins 1 & 2 closed     |
   |---------------------------------+--------------------------|
   |          Receive RCLK           |    Pins 4 & 5 closed     |
   |---------------------------------+--------------------------|
   |     AUX out/AUX in loopback     |    Pins 2 & 5 closed     |
   |------------------------------------------------------------|
   | Note: The default setting for J5 is to have Pins 1 & 4, 2  |
   | & 5, and 3 & 6 closed.                                     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |            HARDWARE OPTION SWITCH CONFIGURATION            |
   |------------------------------------------------------------|
   |                Setting                 |        J2         |
   |----------------------------------------+-------------------|
   | SW5 enabled for hardware option select | Pins 1 & 5 closed |
   |               for Port 1               |                   |
   |----------------------------------------+-------------------|
   | SW6 enabled for hardware option select | Pins 2 & 5 closed |
   |               for Port 2               |                   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               TRI-STATE OUTPUT CONFIGURATION               |
   |------------------------------------------------------------|
   |            Setting            |             J2             |
   |-------------------------------+----------------------------|
   | Tri-state enabled for Port 1  |     Pins 3 & 7 closed      |
   |-------------------------------+----------------------------|
   | Tri-state enabled for Port 2  |     Pins 4 & 8 closed      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |        USER DEFINABLE HARDWARE OPTION CONFIGURATION        |
   |------------------------------------------------------------|
   |   Address    |          SW5          |         SW6         |
   |--------------+-----------------------+---------------------|
   |     6Ah      |    2 & 3, 5 &7 on     |   2 & 3, 5 &7 on    |
   |--------------+-----------------------+---------------------|
   |     B4h      |    1 & 3, 4 & 6 on    |   1 & 3, 4 & 6 on   |
   |------------------------------------------------------------|
   |   Note:These switches are a binary representation of the   |
   |   addresses. The switches have the following decimal       |
   |   values: switch 1=8, switch 2=4, switch 3=2, switch 4=1,  |
   |   switch 5=8, switch 6=4, switch 7=2, switch 8=1.          |
   +------------------------------------------------------------+