PATTON ELECTRONICS COMPANY ========================== 2085 Card Type Interface Converter Chip Set Unidentified I/O Options 25-pin serial port (RS-232), network interface via RJ-45, RJ-11, 25-pin port or terminal block Wiring Type Unshielded twisted pair Maximum Data Rate 115.2Kbps Data Bus External +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |-------------------------+--------+-----------------+-------| | DTE/DCE serial port | CN1 | UTP interface | CN2 | | (25-pin connector) | | | | |------------------------------------------------------------| | Note: | | | | Network interface (CN2) is available with several | | connector options. Device may feature a terminal block, | | RJ-11, RJ-45, or 25-pin (male or female) connector. | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |---------------------------------------+---------+----------| | DTE mode | S2 | On | |---------------------------------------+---------+----------| | DCE mode | S2 | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| |>> | 8ms RTS/CTS delay enabled | S1/3 | On | |---+-------------------------------------+-------+----------| | | RTS/CTS delay disabled | S1/3 | Off | |---+-------------------------------------+-------+----------| |>> | Echo mode disabled | S1/4 | Off | |---+-------------------------------------+-------+----------| | | Echo mode enabled | S1/4 | On | |---+-------------------------------------+-------+----------| |>> | Carrier controlled by RTS | S1/5 | On | |---+-------------------------------------+-------+----------| | | Carrier forced high | S1/5 | Off | |---+-------------------------------------+-------+----------| |>> | Receive impedance set low (120Ohms) | S1/6 | On | |---+-------------------------------------+-------+----------| | | Receive impedance set high | S1/6 | Off | | | (16kOhms) | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | TRANSMIT LINE IMPEDENCE | |------------------------------------------------------------| | Setting | S1/1 | S1/2 | |----------------------------------------+---------+---------| |>> | High impedence enabled | Off | Off | |---+------------------------------------+---------+---------| | | Intermediate impedence enabled | On | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | 2-WIRE/4-WIRE MODE SELECTION | |------------------------------------------------------------| | Setting | S1/7 | S1/8 | |---------------------------------------+----------+---------| |>> | 2-wire mode enabled | On | On | |---+-----------------------------------+----------+---------| | | 4-wire mode enabled enabled | Off | Off | +------------------------------------------------------------+