SDL COMMUNICATIONS, INC. ======================== RISCOM/N2 Card Type Serial Chip Set Hitachi HD64570 Maximum Onboard Memory 256KB DRAM Data Bus 16-bit ISA +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------------------+-------+---------------------+-------| | RS-232, RS-422/449, | CN1 | RS-232, RS-422/449, | CN2 | | RS-530, or V.35 port | | RS-530, or V.35 | | | 1 | | port 2 | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |-------------------------------------+-------+--------------| |>> | Factory configured - do not | S1/7 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S1/8 | Unidentified | | | alter | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT | |------------------------------------------------------------| | J1 is used to set the interrupt. Exact settings are | | unidentified. Interrupts 3, 4, 5, 9, 10, 11, 12, and | | 15 are available. | +------------------------------------------------------------+ +------------------------------------------------------------+ | BASE I/O ADDRESS | |------------------------------------------------------------| | Setting | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 | SW1/6 | |-----------+--------+-------+-------+-------+-------+-------| | | 100h | On | On | On | On | Off | On | |---+-------+--------+-------+-------+-------+-------+-------| | | 110h | Off | On | On | On | Off | On | |---+-------+--------+-------+-------+-------+-------+-------| | | 120h | On | Off | On | On | Off | On | |---+-------+--------+-------+-------+-------+-------+-------| | | 130h | Off | Off | On | On | Off | On | |---+-------+--------+-------+-------+-------+-------+-------| | | 140h | On | On | Off | On | Off | On | |---+-------+--------+-------+-------+-------+-------+-------| |>> | 300h | On | On | On | On | Off | Off | |---+-------+--------+-------+-------+-------+-------+-------| | | 3B0h | Off | Off | On | Off | Off | Off | |---+-------+--------+-------+-------+-------+-------+-------| | | 3C0h | On | On | Off | Off | Off | Off | |---+-------+--------+-------+-------+-------+-------+-------| | | 3D0h | Off | On | Off | Off | Off | Off | |---+-------+--------+-------+-------+-------+-------+-------| | | 3E0h | On | Off | Off | Off | Off | Off | |---+-------+--------+-------+-------+-------+-------+-------| | | 3F0h | Off | Off | Off | Off | Off | Off | |------------------------------------------------------------| | Note: A total of 48 base address settings are | | available. The switches are a binary representation | | of the decimal memory addresses. SW1/6 is the Most | | Significant Bit and switch SW1/1 is the Least | | Significant Bit. The switches have the following | | decimal values: SW1/6=512, SW1/5=256, SW1/4=128, | | SW1/3=64, SW1/2=32, SW1/1=16. Turn off the switches | | and add the values of the switches to obtain the | | correct memory address. (Off=1, On=0) | +------------------------------------------------------------+