AXIOM TECHNOLOGY, INC. ====================== AX8025H Processor 80386SX/CX486SLC Processor 20/25/33/40MHz Speed Chip Set ALI Max. Onboard 16MB DRAM Cache None BIOS AMI Dimensions 169mm x 122mm I/O Options Floppy drive interface, IDE interface, parallel port, serial ports (2) NPU Options 80387SX/CX387 +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |-------------------+----------+------------------+----------| | Floppy drive | CN1 | PC/104 bus | CN11 | | interface | | connector | | |-------------------+----------+------------------+----------| | IDE interface | CN2 | Reset switch | J1 | |-------------------+----------+------------------+----------| | Parallel port | CN3 | Power LED & | J2 | | | | keylock | | |-------------------+----------+------------------+----------| | Auxiliary | CN4 | IDE interface | J3 | | keyboard | | LED | | | connector | | | | |-------------------+----------+------------------+----------| | Serial port 1 | CN7 | Speaker | J4 | |-------------------+----------+------------------+----------| | Serial port 2 | CN8 | External battery | J5 | |-------------------+----------+------------------+----------| | PC/104 bus | CN10 | | | | connector | | | | |------------------------------------------------------------| | Note: The location of jumper J5 is unidentified. | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Jumper | Position | |--------------------------------------+--------+------------| |>> | Parallel port IRQ select IRQ7 | CN5 | pins 13 & | | | | | 14 closed | |---+----------------------------------+--------+------------| | | Parallel port IRQ select IRQ5 | CN5 | pins 15 & | | | | | 16 closed | |---+----------------------------------+--------+------------| |>> | Activate NMI to reset CPU when | JP1 | pins 1 & 2 | | | watch dog times out | | closed | |---+----------------------------------+--------+------------| | | Reset system when watch dog | JP1 | pins 2 & 3 | | | times out | | closed | |---+----------------------------------+--------+------------| | | Watch dog disabled | JP1 | Open | |---+----------------------------------+--------+------------| |>> | External battery type select | JP2 | pins 1 & 2 | | | DS1287/1187 | | closed | |---+----------------------------------+--------+------------| | | External battery type select | JP2 | pins 2 & 3 | | | MC146818 | | closed | |---+----------------------------------+--------+------------| |>> | Parity check enabled | JP3 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| | | Parity check disabled | JP3 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Watch dog timer normal | JP4 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | Watch dog timer reset | JP4 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | IDE interface pin 34 used | JP5 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | IDE interface pin 34 not used | JP5 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Monitor type select monochrome | JP6 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| | | Monitor type select color | JP6 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| |>> | IDE interface enabled | JP7 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | IDE interface disabled | JP7 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Floppy drive interface enabled | JP8 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | Floppy drive interface disabled | JP8 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | NPU synchronous with CPU | JP15 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | NPU asynchronous with CPU | JP15 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Time out period select 1 second | JP21 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| | | Time out period select 10 | JP21 | pins 2 & 3 | | | seconds | | closed | |---+----------------------------------+--------+------------| |>> | Parallel port unidirectional | JP23 | pins 1 & 2 | | | (printer) | | closed | |---+----------------------------------+--------+------------| | | Parallel port bidirectional | JP23 | pins 2 & 3 | | | | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | DRAM CONFIGURATION | |------------------------------------------------------------| | Size | Bank 0 | Bank 1 | |------------------+--------------------+--------------------| | 1MB | (2) 256K x 9 | (2) 256K x 9 | |------------------+--------------------+--------------------| | 2MB | (2) 1M x 9 | NONE | |------------------+--------------------+--------------------| | 4MB | (2) 1M x 9 | (2) 1M x 9 | |------------------+--------------------+--------------------| | 8MB | (2) 4M x 9 | NONE | |------------------+--------------------+--------------------| | 16MB | (2) 4M x 9 | (2) 4M x 9 | +------------------------------------------------------------+ +------------------------------------------------------------+ | CPU TYPE CONFIGURATION | |------------------------------------------------------------| | Type | J6 | |--------------------------+---------------------------------| | 80386SX | Open | |--------------------------+---------------------------------| | CX486SLC | pins 1 & 2, 3 & 4, 5 & 6 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | CPU SPEED CONFIGURATION | |------------------------------------------------------------| | Speed | JP20 | JP22 | |------------------+--------------------+--------------------| | 20MHz | pins 1 & 2 closed | pins 2 & 3 closed | |------------------+--------------------+--------------------| | 25MHz | pins 2 & 3 closed | pins 1 & 2 closed | |------------------+--------------------+--------------------| | 33MHz | pins 2 & 3 closed | pins 2 & 3 closed | |------------------+--------------------+--------------------| | 40MHz | pins 1 & 2 closed | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT CONFIGURATION | |------------------------------------------------------------| | Setting | JP13 | JP14 | |------------------+--------------------+--------------------| | 278 | pins 2 & 3 closed | pins 2 & 3 closed | |------------------+--------------------+--------------------| | 378 | pins 1 & 2 closed | pins 1 & 2 closed | |------------------+--------------------+--------------------| | 3BC | pins 1 & 2 closed | pins 2 & 3 closed | |------------------+--------------------+--------------------| | Disabled | pins 2 & 3 closed | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 CONFIGURATION | |------------------------------------------------------------| | Setting | JP9 | JP10 | |------------------+--------------------+--------------------| | 2E8 | pins 2 & 3 closed | pins 1 & 2 closed | |------------------+--------------------+--------------------| | 3E8 | pins 1 & 2 closed | pins 1 & 2 closed | |------------------+--------------------+--------------------| | 3F8 | pins 2 & 3 closed | pins 2 & 3 closed | |------------------+--------------------+--------------------| | Disabled | pins 1 & 2 closed | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 2 CONFIGURATION | |------------------------------------------------------------| | Setting | JP11 | JP12 | |------------------+--------------------+--------------------| | 2E8 | pins 1 & 2 closed | pins 1 & 2 closed | |------------------+--------------------+--------------------| | 2F8 | pins 2 & 3 closed | pins 2 & 3 closed | |------------------+--------------------+--------------------| | 3E8 | pins 2 & 3 closed | pins 1 & 2 closed | |------------------+--------------------+--------------------| | Disabled | pins 1 & 2 closed | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 INTERRUPT CONFIGURATION | |------------------------------------------------------------| | IRQ | CN5 | |----------------------------+-------------------------------| | IRQ3 | pins 3 & 4 closed | |----------------------------+-------------------------------| | IRQ4 | pins 1 & 2 closed | |----------------------------+-------------------------------| | IRQ5 | pins 5 & 6 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 2 INTERRUPT CONFIGURATION | |------------------------------------------------------------| | IRQ | CN5 | |----------------------------+-------------------------------| | IRQ3 | pins 7 & 8 closed | |----------------------------+-------------------------------| | IRQ4 | pins 9 & 10 closed | |----------------------------+-------------------------------| | IRQ5 | pins 11 & 12 closed | +------------------------------------------------------------+