DECISION COMPUTER INTERNATIONAL CO., LTD. ========================================= IPCCPU Processor Z80 Processor Speed 9.83MHz Chipset Unidentified Maximum Onboard 32KB SRAM/32KB EPROM Memory BIOS Unidentified Video Chipset Unidentified Maximum Video Unidentified Memory Video Types LCD display Supported Highest 4 x 20 (text only) Resolution Supported I/O Options Serial ports (2), LCD video out, expansion bus Dimensions 80 x 100mm +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |-------------------------+--------+-----------------+-------| | External battery | JP6 | Expansion bus | P7 | | connector | | | | |-------------------------+--------+-----------------+-------| | 5V DC power in | P1 | Reset switch | P9 | |-------------------------+--------+-----------------+-------| | Generic serial port 2 | P3 | LCD video out | P10 | |-------------------------+--------+-----------------+-------| | Generic serial port 1 | P4 | IC5 voltage | RV1 | | | | adjustment | | |-------------------------+--------+-----------------+-------| | Keyboard connector | P5 | LCD contrast | RV2 | | (IPCKEY/IPCKEYM) | | adjustment | | |------------------------------------------------------------| | Note:RV1 should be adjusted so that pin 4 of IC5 is 1.3V | | and pin 5 is equal to the voltage going into P1. P3 and P4 | | are not RS-232 serial. The interface type is provided by | | one of the boards on the sections for the IPC232ST, | | IPC232CL, and IPC422/485 cards. | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |----------------------------------------+-------+-----------| |>> | System interrupt timers enabled | JP1 | Closed | |---+------------------------------------+-------+-----------| | | System interrupt timers disabled | JP1 | Open | |---+------------------------------------+-------+-----------| |>> | MAX960 chip not installed in IC5 | JP2 | Closed | |---+------------------------------------+-------+-----------| | | MAX960 chip installed in IC5 | JP2 | Open | |---+------------------------------------+-------+-----------| |>> | Watchdog timer disabled | JP3 | Open | |---+------------------------------------+-------+-----------| | | Watchdog timer enabled | JP3 | Closed | |---+------------------------------------+-------+-----------| |>> | Power fail interrupt disabled | JP4 | Open | |---+------------------------------------+-------+-----------| | | Power fail interrupt enabled | JP4 | Closed | |---+------------------------------------+-------+-----------| |>> | Real-time clock interrupt disabled | JP5 | Open | |---+------------------------------------+-------+-----------| | | Real-time clock interrupt enabled | JP5 | Closed | |---+------------------------------------+-------+-----------| |>> | Keyboard enabled | JP7 | Pins 2 & | | | | | 3 closed | |---+------------------------------------+-------+-----------| | | Keyboard disabled | JP7 | Pins 1 & | | | | | 2 closed | +------------------------------------------------------------+ Card Type Serial Chipset Unidentified I/O Options Serial port +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------------------+-------+---------------------+-------| | Header to main board | P1 | RS-232 or current | P3 | | P3 or P4 | | loop serial port | | |----------------------+-------+---------------------+-------| | DC power in | P2 | | | +------------------------------------------------------------+ IPCCPU (IPC422/485 SERIAL CARD) Card Type Serial Chipset Unidentified I/O Options Serial port +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |-------------------------+-------+------------------+-------| | Header to main board P3 | P1 | RS-422 or RS-485 | P3 | | or P4 | | serial port | | |-------------------------+-------+------------------+-------| | DC power in | P2 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT CONFIGURATION | |------------------------------------------------------------| | Setting | JP2 | JP3 | |------------------+--------------------+--------------------| | RS-422 | Pins 2 & 3 closed | Pins 2 & 3 closed | |------------------+--------------------+--------------------| | RS-485 | Pins 1 & 2 closed | Open | +------------------------------------------------------------+ +------------------------------------------------------------+ | RECEIVER ENABLE SELECTION | |------------------------------------------------------------| | Setting | JP1/A | JP1/B | JP1/C | |---------------------------+----------+----------+----------| | RTS enables receiver | Closed | Open | Open | |---------------------------+----------+----------+----------| | DTR enables receiver | Open | Open | Closed | |---------------------------+----------+----------+----------| | Receiver always enabled | Open | Closed | Open | |------------------------------------------------------------| | Note:The receiver may not be always enabled in RS-485 | | mode. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTE | |------------------------------------------------------------| | No information is available on the IPC232FS card. | +------------------------------------------------------------+