PACKARD BELL ============ PB 386-25 (REVISION D) Processor 80386DX Processor 25MHz Speed Chip Set Intel Max. onboard 8MB DRAM Cache None BIOS Phoenix Dimensions 330mm x 240mm I/O Options 32-bit expansion slots (2), parallel port, serial ports (2) NPU Options 80387/3167 +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |----------------+------------+------------------+-----------| | Parallel port | J10A | Reset switch | J18 | |----------------+------------+------------------+-----------| | Serial port 1 | J10B/pins | Speaker | J19 | | (9 pin) | 1-10 | | | |----------------+------------+------------------+-----------| | Serial port 2 | J10B/pins | Keylock | J20 | | (9 pin) | 11-20 | | | |----------------+------------+------------------+-----------| | Serial port 2 | J10C | 32-bit expansion | S1 & S2 | | (25 pin) | | slots | | |------------------------------------------------------------| | Note: J10C is a 25-pin version of serial port 2 (J10B pins | | 11-20). Either connector may be used, but not both. | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Jumper | Position | |--------------------------------------+--------+------------| |>> | Printer acknowledge trailing | JP1 | pins 2 & 3 | | | edge | | closed | |---+----------------------------------+--------+------------| | | Printer acknowledge leading edge | JP1 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | NPU disabled | JP6 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | NPU enabled | JP6 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Keyboard reset disabled | JP7 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | Keyboard reset enabled | JP7 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | System type select DOS | JP8 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | System type select UNIX | JP8 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Monitor type select color | JP9 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | Monitor type select monochrome | JP9 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | BIOS type select 2764 | JP10 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| | | BIOS type select 27128 | JP10 | pins 2 & 3 | | | | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT CONFIGURATION | |------------------------------------------------------------| | Port 1 | Port 2 (J10B/11-20 or | JP4 | JP5 | | (J10B/1-10) | J10C) | | | |------------------+-----------------------+--------+--------| |>> | COM1/IRQ4 | COM2/IRQ3 | pins 1 | pins 1 | | | | | & 2 | & 2 | |-----+------------+-----------------------+--------+--------| | | COM1/IRQ4 | Disabled | pins 1 | pins 2 | | | | | & 2 | & 3 | |-----+------------+-----------------------+--------+--------| | | Disabled | COM2/IRQ3 | pins 2 | pins 1 | | | | | & 3 | & 2 | |-----+------------+-----------------------+--------+--------| | | Disabled | Disabled | pins 2 | pins 2 | | | | | & 3 | & 3 | |------------------------------------------------------------| | Note: Pins designated should be in the closed position. | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT (J10A) CONFIGURATION | |------------------------------------------------------------| | LPT | JP2 | JP3 | |------------------+--------------------+--------------------| |>> | LPT1 | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | LPT2 | pins 2 & 3 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | DRAM CONFIGURATION | |------------------------------------------------------------| | Size | Bank 0 | Bank 1 | JP17 | JP18 | JP13A | JP13B | |------+--------+--------+--------+--------+--------+--------| | 1MB | (4) | NONE | pins 1 | pins 1 | Open | Open | | | 256K x | | & 2 | & 2 | | | | | 9 | | | | | | |------+--------+--------+--------+--------+--------+--------| | 2MB | (4) | (4) | pins 1 | pins 1 | Open | Closed | | | 256K x | 256K x | & 2 | & 2 | | | | | 9 | 9 | | | | | |------+--------+--------+--------+--------+--------+--------| | 4MB | (4) 1M | NONE | pins 2 | pins 2 | Closed | Open | | | x 9 | | & 3 | & 3 | | | |------+--------+--------+--------+--------+--------+--------| | 8MB | (4) 1M | (4) 1M | pins 2 | pins 2 | Closed | Closed | | | x 9 | x 9 | & 3 | & 3 | | | |------------------------------------------------------------| | Note: Pins designated should be in the closed position. | +------------------------------------------------------------+ +------------------------------------------------------------+ | RAM TYPE CONFIGURATION | |------------------------------------------------------------| | Type | JP11 | JP12 | |------------------------+-----------------+-----------------| | | RAS/CAS | Open | Open | |---+--------------------+-----------------+-----------------| |>> | Fast Paged | Closed | Closed | |---+--------------------+-----------------+-----------------| | | Static Column | Open | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | RAM SPEED CONFIGURATION | |------------------------------------------------------------| | Speed | JP15 | JP16 | |--------------------+-------------------+-------------------| | 100ns or faster | pins 1 & 2 closed | pins 1 & 2 closed | |--------------------+-------------------+-------------------| | Slower than 100ns | pins 2 & 3 closed | pins 2 & 3 closed | +------------------------------------------------------------+