RADISYS CORPORATION =================== EXPLR2 Processor 80386EX Processor Speed 33/40/50/66MHz Chip Set Unidentified Video Chip Set Cirrus Logic Maximum Onboard 32MB Memory Maximum Video 512KB Memory Cache None BIOS Phoenix Dimensions 254mm x 254mm I/O Options Floppy drive interface, IDE interface, parallel port, PS/2 mouse port, serial ports (2), VGA port, PC/104 connectors (2), flat panel connector NPU Options None +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |-------------------+----------+------------------+----------| | LCD connector | CN1 | PC/104 connector | J4A | |-------------------+----------+------------------+----------| | IDE interface | CN2 | Parallel port | J8 | |-------------------+----------+------------------+----------| | Floppy drive | CN6 | Serial port 2 | J9 | | interface | | | | |-------------------+----------+------------------+----------| | PS/2 mouse port | J2 | Serial port 1 | J10 | |-------------------+----------+------------------+----------| | VGA port | J3 | PC card carrier | S1 | |-------------------+----------+------------------+----------| | PC/104 connector | J4 | Reset switch | S2 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function |Label| Position | |-----------------------------------------+-----+------------| | |RFA access select (linear memory/mapped| JP2 |Unidentified| | |page) | | | |-+---------------------------------------+-----+------------| | |RFA WS select (R380 WEFLSH/386EXWR) | JP3 |Unidentified| |-+---------------------------------------+-----+------------| |>>|Factory configured - do not alter | JP4 | Open | |-+---------------------------------------+-----+------------| | |CPU speed 33/40/50/66MHz | JP5 |Unidentified| |-+---------------------------------------+-----+------------| | |BIOS CS select (R380EX/Intel386EX) | JP6 |Unidentified| |-+---------------------------------------+-----+------------| |>>|Flash BIOS boot block disabled | JP7 | Open | |-+---------------------------------------+-----+------------| | |Flash BIOS boot block enabled | JP7 | Closed | |-+---------------------------------------+-----+------------| |>>|Flash BIOS normal operation |JP8A | Open | |-+---------------------------------------+-----+------------| | |Flash BIOS recovery mode |JP8A | Closed | |-+---------------------------------------+-----+------------| |>>|Manufacturing loop at boot disabled |JP8B | Open | |-+---------------------------------------+-----+------------| | |Manufacturing loop at boot enabled |JP8B | Closed | |-+---------------------------------------+-----+------------| |>>|Bottom half (lower 256KB) of FBD |JP8C | Open | | |disabled | | | |-+---------------------------------------+-----+------------| | |Bottom half (lower 256KB) of FBD |JP8C | Closed | | |enabled | | | |-+---------------------------------------+-----+------------| |>>|Flash BIOS write protect disabled |JP8D | Open | |-+---------------------------------------+-----+------------| | |Flash BIOS write protect enabled |JP8D | Closed | |-+---------------------------------------+-----+------------| | |VCC select (3.3v/5v) | JP9 |Unidentified| |-+---------------------------------------+-----+------------| | |Serial port 2 COM select (IRQ3/IRQ5) |JP10 |Unidentified| |-+---------------------------------------+-----+------------| | |VPP select (12v/5v) |JP11 |Unidentified| |-+---------------------------------------+-----+------------| |>>|Boot option with keyboard controller |JP12 | Open | | |disabled | | | |-+---------------------------------------+-----+------------| | |Boot option with keyboard controller |JP12 | Closed | | |enabled | | | |-+---------------------------------------+-----+------------| | |Serial port 1 COM select (IRQ4/IRQ9) |JP13 |Unidentified| |-+---------------------------------------+-----+------------| |>>|Post loop disabled |JP14 | Open | |-+---------------------------------------+-----+------------| | |Post loop enabled |JP14 | Closed | |-+---------------------------------------+-----+------------| |>>|8-bit operation disabled |JP15 | Closed | |-+---------------------------------------+-----+------------| | |8-bit operation enabled |JP15 | Open | |-+---------------------------------------+-----+------------| |>>|R380 voltage select 5v |SW1/1| On | |-+---------------------------------------+-----+------------| | |R380 voltage select 3v/3.3v |SW1/1| Off | |-+---------------------------------------+-----+------------| |>>|Internal real time clock megacell |SW1/2| Off | | |enabled | | | |-+---------------------------------------+-----+------------| | |Internal real time clock megacell |SW1/2| On | | |disabled | | | |-+---------------------------------------+-----+------------| |>>|Internal keyboard & mouse controller |SW1/3| Off | | |megacell enabled | | | |-+---------------------------------------+-----+------------| | |Internal keyboard & mouse controller |SW1/3| On | | |megacell disabled | | | |-+---------------------------------------+-----+------------| |>>|RAS_BS# enabled |SW1/4| Off | |-+---------------------------------------+-----+------------| | |MA11 enabled |SW1/4| On | |-+---------------------------------------+-----+------------| |>>|CS_USR [3:0] outputs enabled |SW1/5| Off | |-+---------------------------------------+-----+------------| | |DIO [3:0] inputs enabled |SW1/5| On | |-+---------------------------------------+-----+------------| |>>|ACTIVITY#/WE_BIOS#/WE_AP#/QDACKB |SW1/6| Off | | |enabled | | | |-+---------------------------------------+-----+------------| | |DIO [7:4] inputs enabled |SW1/6| On | |-+---------------------------------------+-----+------------| |>>|Initial level of digital output select |SW1/7| Off | | |initialize to 0 | | | |-+---------------------------------------+-----+------------| | |Initial level of digital output select |SW1/7| On | | |initialize to 1 | | | |-+---------------------------------------+-----+------------| |>>|User definable bit select 0 |SW1/8| Off | |-+---------------------------------------+-----+------------| | |User definable bit select 1 |SW1/8| On | +------------------------------------------------------------+ +------------------------------------------------------------+ | SIMM CONFIGURATION | |------------------------------------------------------------| | Size | Bank 0 | |----------------------------+-------------------------------| | 2MB | (1) 512K x 36 | |----------------------------+-------------------------------| | 4MB | (1) 1M x 36 | |----------------------------+-------------------------------| | 8MB | (1) 2M x 36 | |----------------------------+-------------------------------| | 16MB | (1) 4M x 36 | |----------------------------+-------------------------------| | 32MB | (1) 8M x 36 | +------------------------------------------------------------+ +------------------------------------------------------------+ | VIDEO MEMORY CONFIGURATION | |------------------------------------------------------------| | Note: 512KB video memory is factory installed and is not | | configurable. | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLAT PANEL SELECTION | |------------------------------------------------------------| | Setting | JP1/A | JP1/B | JP1/C | |--------------------+-------------+------------+------------| |>> | 0-bit disabled | Open | Open | Open | |---+----------------+-------------+------------+------------| | | 0-bit enabled | Closed | Closed | Closed | +------------------------------------------------------------+