ANCOR COMMUNICATIONS, INC. ========================== FCS 266 MCA NIC Type Fiber Channel Processor Intel i960 Processor Speed 33MHz Chipset Ancor Communications VHSCI Maximum Onboard Memory 4.5MB SRAM/128KB Flash ROM Network Transfer Rate 265.6125Mbps Data Bus MCA Topology Star/Peer-Peer Wire Type Fiber optic cable Boot ROM Not available +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------------------+-------+---------------------+-------| | Transmit fiber optic | CN1 | Receive fiber optic | CN2 | | SC connector | | SC connector | | +------------------------------------------------------------+ +------------------------------------------------------------+ | SRAM CONFIGURATION | |------------------------------------------------------------| | The first 512KB of SRAM, used for processor memory, is | | located on the board. Its exact location is unidentified. | | The SRAM SIMM, used as a data buffer, may be 256KB, 1MB, | | or 4MB. The type and configuration of this SIMM is also | | unidentified. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+--------------+----------+---------------------------| | LED1 | Unidentified | Blinking | Normal operation | |------+--------------+----------+---------------------------| | LED1 | Unidentified | 1 blinks | EPROM failed checksum | | | | | test | |------+--------------+----------+---------------------------| | LED1 | Unidentified | 2 blinks | Processor memory failed | | | | | self-test | |------+--------------+----------+---------------------------| | LED1 | Unidentified | 3 blinks | Buffer memory failed | | | | | self-test | |------+--------------+----------+---------------------------| | LED1 | Unidentified | 4 blinks | FPGA failed self-test | |------+--------------+----------+---------------------------| | LED1 | Unidentified | 5 blinks | Flash ROM failed checksum | | | | | test | |------+--------------+----------+---------------------------| | LED1 | Unidentified | 6 blinks | Flash ROM ID failed | | | | | self-test | |------+--------------+----------+---------------------------| | LED1 | Unidentified | 7 blinks | OLC loopback test failed | |------+--------------+----------+---------------------------| | LED1 | Unidentified | 8 blinks | Chipset register failed | | | | | self-test | |------+--------------+----------+---------------------------| | LED1 | Unidentified | 9 blinks | Timer failed self-test | |------+--------------+----------+---------------------------| | LED1 | Unidentified | Off | Power is off or processor | | | | | is not functioning | |------+--------------+----------+---------------------------| | LED2 | Unidentified | On | Card is transmitting data | |------+--------------+----------+---------------------------| | LED2 | Unidentified | Off | Card is not transmitting | | | | | data | |------+--------------+----------+---------------------------| | LED3 | Unidentified | On | Card is receiving data | |------+--------------+----------+---------------------------| | LED3 | Unidentified | Off | Card is not receiving | | | | | data | +------------------------------------------------------------+