BAY NETWORKS, INC. ================== 354-ST Device Type Fiber Optic Extender/Repeater NIC Type Token Ring Maximum Onboard Memory Unidentified Boot ROM Not available Network Transfer Rate 4/16Mbps Topology Ring Wiring Type Fiber optic cable Data Bus External +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------+-------+-------------------------+-------| | IEEE 802.5 data | CN1 | Fiber optic connector | TX | | connector (STP) | | (ST) - transmit | | |------------------+-------+-------------------------+-------| | Fiber optic | RX | | | | connector (ST) - | | | | | receive | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |-------------------------------------+-------+--------------| |>> | Factory configured - do not | SW1/1 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| | | 354-ST used as fiber optic lobe | SW1/2 | On | | | extender | | | |---+---------------------------------+-------+--------------| | | 354-ST used as trunk repeater | SW1/2 | Off | |---+---------------------------------+-------+--------------| | | DTE/Ring in enabled | SW1/3 | On | |---+---------------------------------+-------+--------------| | | HOST/Ring out enabled | SW1/3 | Off | |---+---------------------------------+-------+--------------| | | Eql on (354-ST is connected to | SW1/4 | On | | | a 3502A Host Module) | | | |---+---------------------------------+-------+--------------| | | Eql off (354-ST is connected to | SW1/4 | Off | | | a 3505 Host Module or Token | | | | | Ring station) | | | |---+---------------------------------+-------+--------------| | | Attached device is not a | SW1/5 | On | | | SynOptics concentrator | | | |---+---------------------------------+-------+--------------| | | Attached device is a SynOptics | SW1/5 | Off | | | concentrator | | | |---+---------------------------------+-------+--------------| | | 4Mbps mode enabled | SW1/6 | On | |---+---------------------------------+-------+--------------| | | 16Mbps mode enabled | SW1/6 | Off | |------------------------------------------------------------| | Note: A Synoptics fiber optic repeater module may | | only be connected when the device is configured as a | | trunk media converter. If the device is configured as | | a lobe extender, SW1/5 is not used. | +------------------------------------------------------------+ +------------------------------------------------------------+ | LOBE UNIT DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+-------+--------+------------------------------------| | LED1 | Green | On | 354-ST is in 4mbps mode | |------+-------+--------+------------------------------------| | LED1 | Green | Off | 354-ST is in not in 4mbps mode | |------+-------+--------+------------------------------------| | LED2 | Green | On | 354-ST is in 16mbps mode | |------+-------+--------+------------------------------------| | LED2 | Green | Off | 354-ST is in not in 16mbps mode | |------+-------+--------+------------------------------------| | LED3 | Green | On | Unit has been inserted into the | | | | | ring | |------+-------+--------+------------------------------------| | LED3 | Green | Off | Unit has not been inserted into | | | | | the ring | |------+-------+--------+------------------------------------| | LED4 | Green | On | Phantom detected from remote | | | | | 354-ST. Fiber optic link is good | |------+-------+--------+------------------------------------| | LED4 | Green | Off | Phantom not detected from remote | | | | | 354-ST. Fiber optic link is broken | +------------------------------------------------------------+ +------------------------------------------------------------+ | TRUNK UNIT DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+-------+--------+------------------------------------| | LED1 | Green | On | 354-ST is in 4mbps mode | |------+-------+--------+------------------------------------| | LED1 | Green | Off | 354-ST is in not in 4mbps mode | |------+-------+--------+------------------------------------| | LED2 | Green | On | 354-ST is in 16mbps mode | |------+-------+--------+------------------------------------| | LED2 | Green | Off | 354-ST is in not in 16mbps mode | |------+-------+--------+------------------------------------| | LED3 | Green | On | Phantom signal is being received | | | | | from Synoptics module | |------+-------+--------+------------------------------------| | LED3 | Green | Off | Phantom signal is not being | | | | | received from Synoptics module | |------+-------+--------+------------------------------------| | LED4 | Green | On | Phantom detected from remote | | | | | 354-ST or Synoptics module. | | | | | | | | | | Fiber optic link is good | |------+-------+--------+------------------------------------| | LED4 | Green | Off | Phantom not detected from remote | | | | | 354-ST or Synoptics module. Fiber | | | | | optic link is broken | +------------------------------------------------------------+