DANPEX CORPORATION (ADI SYSTEMS, INC.)
======================================

   Aquila AQ-EISA

   NIC Type         Ethernet                                      
   Transfer Rate    10Mbps                                        
   Data Bus         32-bit EISA                                   
   Topology         Star                                          
                                                                  
                    Linear bus                                    
   Wiring Type      RG-58/U 50ohm coaxial                         
                                                                  
                    Unshielded twisted pair                       
                                                                  
                    AUI Transceiver via DB-15 port                
   Boot ROM         Not Available                                 

<gopher://bitreich.org/I/th99/n/C-D/40162-1.png>
   

   +------------------------------------------------------------+
   |                         CABLE TYPE                         |
   |------------------------------------------------------------|
   |               Type               |    JP1     |   JP3-10   |
   |----------------------------------+------------+------------|
   |>> |        RG-58A/U 50ohm        | Pins 1 & 2 | Pins 1 & 2 |
   |   |                              |   Closed   |   Closed   |
   |---+------------------------------+------------+------------|
   |   |  AUI transceiver via DB-15   | Pins 1 & 2 | Pins 2 & 3 |
   |   |             port             |   Closed   |   Closed   |
   |---+------------------------------+------------+------------|
   |   |   Unshielded twisted pair    | Pins 2 & 3 |    N/A     |
   |   |                              |   Closed   |            |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    LINK INTEGRITY TEST                     |
   |------------------------------------------------------------|
   |           Setting           |             JP31             |
   |-----------------------------+------------------------------|
   |>>        |     Enabled      |      Pins 1 & 2 Closed       |
   |----------+------------------+------------------------------|
   |          |     Disabled     |      Pins 2 & 3 Closed       |
   |------------------------------------------------------------|
   | Note:Link Integrity is only used with 10Base-T wiring.     |
   | When using an AUI transciever, the test should be          |
   | disabled.                                                  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   | LED  | Color |  Status  |            Condition             |
   |------+-------+----------+----------------------------------|
   | LED1 | Green |    On    |   Data is being transmitted or   |
   |      |       |          |             received             |
   |------+-------+----------+----------------------------------|
   | LED1 |  Red  | Blinking | Data is not being transmitted or |
   |      |       |          |             received             |
   |------+-------+----------+----------------------------------|
   | LED1 |  Red  |   Off    | Twisted pair network connection  |
   |      |       |          |             is good              |
   +------------------------------------------------------------+