DANPEX CORPORATION
==================

   EN/2T

   NIC Type         Ethernet                                      
   Transfer Rate    10Mbps                                        
   Data Bus         16-bit MCA                                    
   Topology         Star                                          
   Wiring Type      Unshielded twisted pair                       
                                                                  
                    AUI transceiver via DB-15 port                
   Boot ROM         Available                                     

<gopher://bitreich.org/I/th99/n/C-D/40469-1.png>
   

   +------------------------------------------------------------+
   |                    LINK INTEGRITY TEST                     |
   |------------------------------------------------------------|
   |            Setting            |            JP1             |
   |-------------------------------+----------------------------|
   |>>         |      Enabled      |     Pins 2 & 3 closed      |
   |-----------+-------------------+----------------------------|
   |           |     Disabled      |     Pins 1 & 2 closed      |
   |------------------------------------------------------------|
   | Note:The link integrity test is only valid when the cable  |
   | type is unshielded twisted pair.                           |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                         CABLE TYPE                         |
   |------------------------------------------------------------|
   |                Type                |      JP2A - JP2I      |
   |------------------------------------+-----------------------|
   |>> |    Unshielded twisted pair     |   Pins 2 & 3 closed   |
   |---+--------------------------------+-----------------------|
   |   | AUI transceiver via DB-15 port |   Pins 1 & 2 closed   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                FACTORY CONFIGURED SETTINGS                 |
   |------------------------------------------------------------|
   |            Jumper            |           Setting           |
   |------------------------------+-----------------------------|
   |             JP3              |           Unused            |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   |    LED    |   Status   |             Condition             |
   |-----------+------------+-----------------------------------|
   |   LED1    |     On     |  Twisted pair connection is good  |
   |-----------+------------+-----------------------------------|
   |   LED1    |    Off     | Twisted pair connection is broken |
   |-----------+------------+-----------------------------------|
   |   LED2    |     On     |     Data is being transmitted     |
   |-----------+------------+-----------------------------------|
   |   LED2    |    Off     |   Data is not being transmitted   |
   |-----------+------------+-----------------------------------|
   |   LED3    |     On     |   Collision detected on network   |
   |-----------+------------+-----------------------------------|
   |   LED3    |    Off     |         Normal operation          |
   |-----------+------------+-----------------------------------|
   |   LED4    |     On     |      Data is being received       |
   |-----------+------------+-----------------------------------|
   |   LED4    |    Off     |    Data is not being received     |
   +------------------------------------------------------------+