CABLETRON SYSTEMS, INC. ======================= E1100 SERIES NIC Type Ethernet Transfer Rate 10Mbps Data Bus 8-bit ISA Topology Star Linear Bus (Depending on the model) Wiring Type Various (Depending on the model) Boot ROM Available +------------------------------------------------------------+ | MISCELLANEOUS NOTES | |------------------------------------------------------------| | The jumper settings for the entire line of E1100 card are | | exactly the same. To save space we have only listed these | | settings once instead of including a table for each card. | | The only differences between the models are the wiring | | types and topologies. | +------------------------------------------------------------+ +------------------------------------------------------------+ | I/O BASE ADDRESS | |------------------------------------------------------------| | Address | JP1A | JP1B | |--------------------+-------------------+-------------------| | 220 - 23Fh | Closed | Closed | |--------------------+-------------------+-------------------| | 280 - 29Fh | Closed | Open | |--------------------+-------------------+-------------------| | 300 - 31Fh | Open | Closed | |--------------------+-------------------+-------------------| | 380 - 39Fh | Open | Open | +------------------------------------------------------------+ +------------------------------------------------------------+ | BOOT ROM ADDRESS & INTERRUPT REQUEST | |------------------------------------------------------------| | Address | IRQ | JP2A | JP2B | |------------------+-----------------+-----------+-----------| |>> | Disabled | Software Select | Open | Open | |---+--------------+-----------------+-----------+-----------| | | C0000h | IRQ3 | Closed | Closed | |---+--------------+-----------------+-----------+-----------| | | D0000h | IRQ5 | Open | Closed | |---+--------------+-----------------+-----------+-----------| | | E0000h | IRQ7 | Closed | Open | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |--------+--------+----------+-------------------------------| | LED1 | Green | Blinking | Data is being transmitted | |--------+--------+----------+-------------------------------| | LED1 | Green | Off | Data is not being transmitted | |--------+--------+----------+-------------------------------| | LED2 | Red | Blinking | Collision detected on network | |--------+--------+----------+-------------------------------| | LED2 | Red | Off | Normal operation | |--------+--------+----------+-------------------------------| | LED3 | Yellow | Blinking | Data is being received | |--------+--------+----------+-------------------------------| | LED3 | Yellow | Off | Data is not being received | |--------+--------+----------+-------------------------------| | LED4 | Green | On | Card is powered/Twisted pair | | | | | network conneciton is good | |--------+--------+----------+-------------------------------| | LED4 | Green | Off | Card is not powered/Twisted | | | | | pair network conneciton is | | | | | broken | |--------+--------+----------+-------------------------------| | LED5 | Green | On | Lower twisted pair network | | | | | conneciton is good | |--------+--------+----------+-------------------------------| | LED5 | Green | Off | Lower twisted pair network | | | | | conneciton is broken | |------------------------------------------------------------| | Note:On NICs that have twisted pair connectors LED 4 | | designates the state of the connection, while on NICs that | | do not have twisted -pair connectors LED 4 indicates if | | power is applied to the card. LED 5 is present only on | | cards that have two RJ-45 connectors. | +------------------------------------------------------------+