CORVUS SYSTEMS, INC.
====================

   TRANSPORTER MODEL 8010-10440

   NIC Type              OmniNet (proprietary)                    
   Network Transfer Rate Unidentified                             
   Data Bus              8-bit ISA                                
   Topology              Linear Bus                               
   Wire Type             Shielded/Unshielded twisted pair         
   Boot ROM              Available                                

<gopher://bitreich.org/I/th99/n/C-D/41795-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                     Function                      | Label  |
   |---------------------------------------------------+--------|
   | Unshielded or shielded twisted pair via 1/8" plug |  CN1   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |                Setting                | Label |  Position  |
   |---------------------------------------+-------+------------|
   |>> | Factory configured - do not alter |  E2   | Pins 1 & 2 |
   |   |                                   |       |   closed   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        NODE ADDRESS                        |
   |------------------------------------------------------------|
   | Setting | U14/1  | U14/2  | U14/3  | U14/4 | U14/5 | U14/6 |
   |---------+--------+--------+--------+-------+-------+-------|
   |    0    |   On   |   On   |   On   |  On   |  On   |  On   |
   |---------+--------+--------+--------+-------+-------+-------|
   |    1    |  Off   |   On   |   On   |  On   |  On   |  On   |
   |---------+--------+--------+--------+-------+-------+-------|
   |    2    |   On   |  Off   |   On   |  On   |  On   |  On   |
   |---------+--------+--------+--------+-------+-------+-------|
   |    3    |  Off   |  Off   |   On   |  On   |  On   |  On   |
   |---------+--------+--------+--------+-------+-------+-------|
   |    4    |   On   |   On   |  Off   |  On   |  On   |  On   |
   |---------+--------+--------+--------+-------+-------+-------|
   |   59    |  Off   |  Off   |   On   |  Off  |  Off  |  Off  |
   |---------+--------+--------+--------+-------+-------+-------|
   |   60    |   On   |   On   |  Off   |  Off  |  Off  |  Off  |
   |---------+--------+--------+--------+-------+-------+-------|
   |   61    |  Off   |   On   |  Off   |  Off  |  Off  |  Off  |
   |---------+--------+--------+--------+-------+-------+-------|
   |   62    |   On   |  Off   |  Off   |  Off  |  Off  |  Off  |
   |---------+--------+--------+--------+-------+-------+-------|
   |   63    |  Off   |  Off   |  Off   |  Off  |  Off  |  Off  |
   |------------------------------------------------------------|
   |      Note: A total of 64 node address settings are         |
   |      available. The switches are a binary representation   |
   |      of the decimal node addresses. U14/6 is the Most      |
   |      Significant Bit and switch U14/1 is the Least         |
   |      Significant Bit. The switches have the following      |
   |      decimal values: U14/6=32, U14/5=16, U14/4=8, U14/3=4, |
   |      U14/2=2, U14/1=1. Turn off the switches and add the   |
   |      values of the switches that are off to obtain the     |
   |      correct node ID. (Off=1, On=0)                        |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       BIAS SELECTION                       |
   |------------------------------------------------------------|
   |        Setting        |      U14/7       |      U14/8      |
   |-----------------------+------------------+-----------------|
   |        Normal         |       Off        |       Off       |
   |-----------------------+------------------+-----------------|
   |        Biased         |        On        |       On        |
   |------------------------------------------------------------|
   |      Note:Only one machine per network should be set to    |
   |      biased.                                               |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      BASE I/O ADDRESS                      |
   |------------------------------------------------------------|
   |    Setting    |   E1/A    |   E1/B   |   E1/C   |   E1/D   |
   |---------------+-----------+----------+----------+----------|
   |     |  240h   |  Closed   |   Open   |   Open   |   Open   |
   |-----+---------+-----------+----------+----------+----------|
   |>>   |  248h   |   Open    |  Closed  |   Open   |   Open   |
   |-----+---------+-----------+----------+----------+----------|
   |     |  250h   |   Open    |   Open   |  Closed  |   Open   |
   |-----+---------+-----------+----------+----------+----------|
   |     |  258h   |   Open    |   Open   |   Open   |  Closed  |
   |------------------------------------------------------------|
   |      Note:E1 is a set of solder contacts. To change the    |
   |      address, you must cut the trace on E1/C andhard-wire  |
   |      a jumper with a soldering gun.                        |
   +------------------------------------------------------------+