DIGITAL EQUIPMENT CORPORATION
=============================

   UTP DAS ADAPTER (DEFPA-MB)

   Card Type              Network Interface Card                  
   NIC Type               FDDI                                    
   Maximum Onboard Memory Unidentified                            
   Boot ROM               Unidentified                            
   Network Transfer Rate  100Mbps                                 
   Topology               Star                                    
   Wiring Type            Unshielded twisted pair                 
   Data Bus               32-bit PCI                              

<gopher://bitreich.org/I/th99/n/C-D/42003-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |       Function       | Label |      Function       | Label |
   |----------------------+-------+---------------------+-------|
   | UTP connector (port  |  CN1  | UTP connector (port |  CN2  |
   | B)                   |       | A)                  |       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   | LED1 | Green  |    On    |   Network connection is good    |
   |      |        |          |            (port A)             |
   |------+--------+----------+---------------------------------|
   | LED1 | Green  | Blinking | Network connection in progress  |
   |      |        |          |            (port A)             |
   |------+--------+----------+---------------------------------|
   | LED1 | Green  |   Off    |  Network connection is broken   |
   |      |        |          |            (port A)             |
   |------+--------+----------+---------------------------------|
   | LED1 |  Red   |    On    |        See Note (port A)        |
   |------+--------+----------+---------------------------------|
   | LED1 |  Red   | Blinking |    Illegal topology (port A)    |
   |------+--------+----------+---------------------------------|
   | LED1 |  Red   |   Off    |  Network connection is broken   |
   |      |        |          |            (port B)             |
   |------+--------+----------+---------------------------------|
   | LED2 | Green  |    On    |   Network connection is good    |
   |      |        |          |            (port B)             |
   |------+--------+----------+---------------------------------|
   | LED2 | Green  | Blinking | Network connection in progress  |
   |      |        |          |            (port B)             |
   |------+--------+----------+---------------------------------|
   | LED2 | Green  |   Off    |  Network connection is broken   |
   |      |        |          |            (port B)             |
   |------+--------+----------+---------------------------------|
   | LED2 |  Red   |    On    |        See Note (port B)        |
   |------+--------+----------+---------------------------------|
   | LED2 |  Red   | Blinking |    Illegal topology (port B)    |
   |------+--------+----------+---------------------------------|
   | LED2 |  Red   |   Off    |  Network connection is broken   |
   |      |        |          |            (port B)             |
   |------------------------------------------------------------|
   | Note: If LED1 or LED2 is on after system boots, indicates  |
   | broken port or Link Confidence Test (LCT) failure; retry   |
   | loop. If on before system boots, indicates self-test       |
   | failure.                                                   |
   +------------------------------------------------------------+