COMPU-SHACK PRODUCTION, GMBH
============================

   CS-FDDI EISA-MMF-DAS

   Card Type              Network Interface Card                  
   NIC Type               FDDI                                    
   Maximum Onboard Memory Unidentified                            
   Boot ROM               Available (location unidentified)       
   Network Transfer Rate  100Mbps                                 
   Topology               Ring                                    
   Wiring Type            Fiber optic cable                       
   Data Bus               16-bit EISA                             

<gopher://bitreich.org/I/th99/n/C-D/42028-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |           Function            |           Label            |
   |-------------------------------+----------------------------|
   | Fiber-optic connector via MIC |            CN1             |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |            Function             |   Label   |   Position   |
   |---------------------------------+-----------+--------------|
   |>> | Boot ROM disabled           |  JP13/A   |     Open     |
   |---+-----------------------------+-----------+--------------|
   |   | Boot ROM enabled            |  JP13/A   |    Closed    |
   |---+-----------------------------+-----------+--------------|
   |>> | Factory configured - do not |  JP13/E   | Unidentified |
   |   | alter                       |           |              |
   |---+-----------------------------+-----------+--------------|
   |>> | Factory configured - do not | JP21/pins | Unidentified |
   |   | alter                       |   1 & 2   |              |
   |---+-----------------------------+-----------+--------------|
   |   | Hard configuration mode     | JP21/pins |     Open     |
   |   | selected                    |   3 & 4   |              |
   |---+-----------------------------+-----------+--------------|
   |   | Soft configuration mode     | JP21/pins |    Closed    |
   |   | selected                    |   3 & 4   |              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 BASE I/O ADDRESS SELECTION                 |
   |------------------------------------------------------------|
   |      Address      |   JP13/B    |   JP13/C    |   JP13/D   |
   |-------------------+-------------+-------------+------------|
   |   |   200h-21Fh   |   Closed    |   Closed    |   Closed   |
   |---+---------------+-------------+-------------+------------|
   |   |   220h-23Fh   |   Closed    |   Closed    |    Open    |
   |---+---------------+-------------+-------------+------------|
   |   |   240h-25Fh   |   Closed    |    Open     |   Closed   |
   |---+---------------+-------------+-------------+------------|
   |   |   280h-29Fh   |   Closed    |    Open     |    Open    |
   |---+---------------+-------------+-------------+------------|
   |>> |   300h-31Fh   |    Open     |   Closed    |   Closed   |
   |---+---------------+-------------+-------------+------------|
   |   |   320h-33Fh   |    Open     |   Closed    |    Open    |
   |---+---------------+-------------+-------------+------------|
   |   |   340h-35Fh   |    Open     |    Open     |   Closed   |
   +------------------------------------------------------------+

+--------------------------------------------------------------------------+
|                           INTERRUPT SELECTION                            |
|--------------------------------------------------------------------------|
|IRQ |JP2/A |JP2/B |JP2/C |JP2/D |JP2/E |JP2/F |JP2/G |JP2/H |JP2/I |JP2/J |
|----+------+------+------+------+------+------+------+------+------+------|
| |3 | Open | Open | Open | Open | Open | Open | Open | Open | Open |Closed|
|-+--+------+------+------+------+------+------+------+------+------+------|
| |4 | Open | Open | Open | Open | Open | Open | Open | Open |Closed| Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
|>>|5 | Open | Open | Open | Open | Open | Open | Open |Closed| Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |7 | Open | Open | Open | Open | Open | Open |Closed| Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |9 | Open | Open | Open | Open | Open |Closed| Open | Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |10| Open | Open | Open | Open |Closed| Open | Open | Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |11| Open | Open | Open |Closed| Open | Open | Open | Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |12| Open | Open |Closed| Open | Open | Open | Open | Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |14| Open |Closed| Open | Open | Open | Open | Open | Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |15|Closed| Open | Open | Open | Open | Open | Open | Open | Open | Open |
+--------------------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   | LED  |    Color     | Status |          Condition          |
   |------+--------------+--------+-----------------------------|
   | LED1 | Unidentified |   On   |   See conditions in note    |
   |      |              |        |            below            |
   |------+--------------+--------+-----------------------------|
   | LED1 | Unidentified |  Off   |   See conditions in note    |
   |      |              |        |            below            |
   |------+--------------+--------+-----------------------------|
   | LED2 | Unidentified | On/Off |        Unidentified         |
   |------+--------------+--------+-----------------------------|
   | LED3 |    Yellow    |   On   |        Data is being        |
   |      |              |        |    transmitted/received     |
   |------+--------------+--------+-----------------------------|
   | LED3 |    Yellow    |  Off   |      Data is not being      |
   |      |              |        |    transmitted/received     |
   |------+--------------+--------+-----------------------------|
   | LED4 |    Green     |   On   |   Ring connection is good   |
   |------+--------------+--------+-----------------------------|
   | LED4 |    Green     |  Off   |  Ring connection is broken  |
   |------------------------------------------------------------|
   | Note: LED1 varies depending on model. Red (On: Illegal     |
   | connection, Off: Valid connection); or Orange (On: Line    |
   | error alarm activated, Off: Line error alarm not           |
   | activated).                                                |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       TECHNICAL NOTE                       |
   |------------------------------------------------------------|
   | Note: When the board is operated in soft configuration     |
   | mode, jumpers JP13 and JP2 must be open. JP21/pins 1 & 2   |
   | function to toggle I/O address selection. If an I/O        |
   | address collision is detected during installation, the     |
   | shunt on JP21/pins 1 & 2 can be changed (while the PC is   |
   | running) to force the software to try the next larger I/O  |
   | address. For example, if a collision is detected using I/O |
   | address 300h, removing shunt on JP21/pins 1 & 2 will force |
   | the software to try I/O address 320h.                      |
   +------------------------------------------------------------+