INVISIBLE SOFTWARE, INC. ======================== ETHERNET/16 NETWORK ADAPTER NIC Type Ethernet Transfer Rate 10Mbps Data Bus 16-bit ISA Topology Linear bus Wiring Type RG58A/U 50ohm coaxial Boot ROM Available +------------------------------------------------------------+ | INTERRUPT SETTINGS | |------------------------------------------------------------| | IRQ | SW1/1 | SW1/2 | SW1/3 | SW1/4 | |----------+------------+------------+-----------+-----------| | 2 | Off | Off | Off | On | |----------+------------+------------+-----------+-----------| | 3 | Off | Off | On | Off | |----------+------------+------------+-----------+-----------| | 4 | Off | On | Off | Off | |----------+------------+------------+-----------+-----------| | 11 | On | Off | Off | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | BOOT ROM ADDRESS | |------------------------------------------------------------| | Address | SW1/5 | SW1/6 | |--------------------+-------------------+-------------------| | CC00h | On | On | |--------------------+-------------------+-------------------| | D400h | On | Off | |--------------------+-------------------+-------------------| | DC00h | Off | On | |--------------------+-------------------+-------------------| | E400h | Off | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | BASE I/O ADDRESS | |------------------------------------------------------------| | Address | SW1/7 | |-------------------------------+----------------------------| | 300-31Fh | On | |-------------------------------+----------------------------| | 340-35Fh | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | BUS TIMING CONFIGURATION | |------------------------------------------------------------| | Timing | SW1/8 | |------------------------------+-----------------------------| | Normal | On | |------------------------------+-----------------------------| | Early | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | ROM SIZE | |------------------------------------------------------------| | Size | W1 | W4 | |------------------+--------------------+--------------------| | 16KB | Pins 1 & 2 closed | Pins 2 & 3 closed | |------------------+--------------------+--------------------| | 32KB | Pins 2 & 3 closed | Pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | BUFFER RAM SIZE | |------------------------------------------------------------| | Size | W2 | W3 | |------------------+--------------------+--------------------| | 16KB | Pins 2 & 3 closed | Pins 2 & 3 closed | |------------------+--------------------+--------------------| | 64KB | Pins 1 & 2 closed | Pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | STATION ADDRESS SELECTION | |------------------------------------------------------------| | Node | SW3/1 |SW3/2 |SW3/3 |SW3/4 |SW3/5 |SW3/6 |SW3/7 | |----------+-------+------+------+------+------+------+------| | Dynamic | On | On | On | On | On | On | On | |----------+-------+------+------+------+------+------+------| | 1 | On | On | On | On | On | On | On | |----------+-------+------+------+------+------+------+------| | 2 | On | On | On | On | On | On | Off | |----------+-------+------+------+------+------+------+------| | 3 | On | On | On | On | On | On | Off | |------------------------------------------------------------| | Note:A total of 128 node address settings are available. | | The switches are a binary representation of the decimal | | node addresses. Switch 7 is the Least Significant Bit and | | switch 1 is the Most Significant Bit. The switches have | | the following decimal values: switch 1=64, 2=32, 3=16, | | 4=8, 5=4, 6=2, 7=1. Turn Off the switches and add the | | values of the Off switches to obtain the correct node | | address. (On=0, Off=1) | +------------------------------------------------------------+ +------------------------------------------------------------+ | BOOT ROM | |------------------------------------------------------------| | Mode | SW3/8 | |----------------------------+-------------------------------| | 16KB | Pins 2 & 3 closed | |----------------------------+-------------------------------| | 64KB | Pins 1 & 2 closed | +------------------------------------------------------------+