NATIONAL SEMICONDUCTOR CORPORATION ================================== ETHERNODE 16ATX NIC Type Ethernet Transfer Rate 10Mbps Data Bus 8/16-bit ISA Topology Linear Bus Wiring Type RG--58A/U 50ohm coaxial AUI transceiver via DB-15 port Boot ROM Available +------------------------------------------------------------+ | CARD IDENTIFICATION NUMBER | |------------------------------------------------------------| | Number | JP1A | JP1B | JP1C | JP1D | |--------------+-----------+-----------+----------+----------| |>> | 1 | Open | Open | Open | Closed | |-------+------+-----------+-----------+----------+----------| | | 2 | Open | Open | Closed | Open | |-------+------+-----------+-----------+----------+----------| | | 3 | Open | Closed | Open | Open | |-------+------+-----------+-----------+----------+----------| | | 4 | Closed | Open | Open | Open | |------------------------------------------------------------| | Note: Up to four NICs can be installed in a single system. | | If more than one card is installed, each card must have a | | different Identification number. | +------------------------------------------------------------+ +------------------------------------------------------------+ | NETWORK SEGMENT LENGTH NOTES | |------------------------------------------------------------| | The segment length is automatically detected and | | configured on this card, but may not be on other cards on | | the network segment. All NICs on the network segment must | | have this option set the same. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DATA BUS SPEED NOTES | |------------------------------------------------------------| | On some systems the data bus timing is not truly IBM PC/AT | | compatible. If the card is not initializing, Changing the | | data bus speed from 'Normal' to 'Fast' may allow the card | | to operate properly. To change the data bus speed you must | | use the ICRCNFIG utility that comes with the card. | +------------------------------------------------------------+ +------------------------------------------------------------+ | BOOT ROM/CHECKPOINT SECURITY CHIP NOTES | |------------------------------------------------------------| | The boot ROM socket accepts an 8K boot ROM or a CheckPoint | | security chip. The CheckPoint security chip supplies virus | | protection, access control, and access logging functions. | +------------------------------------------------------------+