NETWORTH, INC.
==============

   UTP32A/UBUTP32A

   NIC Type         Ethernet                                      
   Transfer Rate    10Mbps                                        
   Data Bus         8/16-bit ISA                                  
   Topology         Linear Bus                                    
   Wiring Type      Unshielded twisted pair                       
   Boot ROM         Available                                     

<gopher://bitreich.org/I/th99/n/M-O/40600-1.png>
   

   +------------------------------------------------------------+
   |                      NIC EPROM RESET                       |
   |------------------------------------------------------------|
   |               Function               |         W1          |
   |--------------------------------------+---------------------|
   |     | Compatibility mode enabled     |  Pins 1 & 2 closed  |
   |-----+--------------------------------+---------------------|
   |>>   | Enhanced mode enabled          |  Pins 2 & 3 closed  |
   |------------------------------------------------------------|
   |      Note:Compatibility mode should be enabled when the    |
   |      NIC is installed in main board slot 0, or if system   |
   |      NIC is installed in utilizes an earlier model Intel   |
   |      processor.                                            |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/n/M-O/40600-2.png>
   

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   | LED  | Color  | Status |             Condition             |
   |------+--------+--------+-----------------------------------|
   | LED1 | Green  |   On   |      data is being received       |
   |------+--------+--------+-----------------------------------|
   | LED1 | Green  |  Off   |    data is not being received     |
   |------+--------+--------+-----------------------------------|
   | LED2 |  Red   |   On   |  Twisted pair reversed polarity,  |
   |      |        |        |         card compensating         |
   |------+--------+--------+-----------------------------------|
   | LED2 |  Red   |  Off   |        Twisted pair proper        |
   |      |        |        |    polarity/10BaseT not in use    |
   |------+--------+--------+-----------------------------------|
   | LED3 | Green  |   On   |     data is being transmitted     |
   |------+--------+--------+-----------------------------------|
   | LED3 | Green  |  Off   |   data is not being transmitted   |
   |------+--------+--------+-----------------------------------|
   | LED4 | Yellow |   On   |        10BaseT port in use        |
   |------+--------+--------+-----------------------------------|
   | LED4 | Yellow |  Off   |      10BaseT port not in use      |
   |------+--------+--------+-----------------------------------|
   | LED5 | Green  |   On   |       Link integrity exists       |
   |------+--------+--------+-----------------------------------|
   | LED5 | Green  |  Off   |       Link integrity broken       |
   |------+--------+--------+-----------------------------------|
   | LED6 | Yellow |   On   |    Network collision detected     |
   |------+--------+--------+-----------------------------------|
   | LED6 | Yellow |  Off   |         Normal operation          |
   |------------------------------------------------------------|
   | Note:LED5 is only functional when link integrity is        |
   | enabled                                                    |
   +------------------------------------------------------------+