PURE DATA LTD. ============== PD1516PLUS-T (TWISTED PAIR) Transfer Rate 2.5Mbps Data Bus 16-bit ISA Topology Star Linear Bus Wiring Type Shielded/Unshielded twisted pair Boot ROM Available +------------------------------------------------------------+ | CONFIGURATION MEMORY CLEAR | |------------------------------------------------------------| | Clear | JP1 | |--------------------------------------------------+---------| |>> | Normal operation | Open | |---+----------------------------------------------+---------| | | Clear all addresses and settings from memory | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | CARDS INSTALLED | |------------------------------------------------------------| | Card | JP2A | JP2B | JP2C | JP2D | | number | | | | | |------------+-----------+-----------+-----------+-----------| | 1 | Closed | Open | Open | Open | |------------+-----------+-----------+-----------+-----------| | 2 | Open | Closed | Open | Open | |------------+-----------+-----------+-----------+-----------| | 3 | Open | Open | Closed | Open | |------------+-----------+-----------+-----------+-----------| | 4 | Open | Open | Open | Closed | |------------------------------------------------------------| | Note:If there is only one NIC installed in a system, set | | this option to the "1" position. If this NIC is the | | second NIC to be installed in a system, set this option | | to the "2" position and so on. | +------------------------------------------------------------+ +------------------------------------------------------------+ | COMPATIBILITY MODE | |------------------------------------------------------------| | Condition | JP3 | |---------------------------------------------+--------------| |>> | Compatibility mode disabled | Open | |---------+-----------------------------------+--------------| | | Compatibility mode enabled | Closed | |------------------------------------------------------------| | Note: Compatibility mode should be enabled only when the | | NIC is installed in a system using a Suntac 286 chipset. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+-------+----------+----------------------------------| | LED1 | Red | Blinking | I/O bus activity | |------+-------+----------+----------------------------------| | LED1 | Red | Off | No I/O bus activity | |------+-------+----------+----------------------------------| | LED2 | Green | On | Data is being transmitted or | | | | | received | |------+-------+----------+----------------------------------| | LED2 | Green | Blinking | No network activity detected, or | | | | | bad connection | +------------------------------------------------------------+