PURE DATA, LTD.
===============

   PDI8023-16T

   NIC Type         Ethernet                                      
   Transfer Rate    10Mbps                                        
   Data Bus         16-bit ISA                                    
   Topology         Star                                          
   Wiring Type      Unshielded twisted pair                       
   Boot ROM         Available                                     

<gopher://bitreich.org/I/th99/n/P-R/40495-1.png>
   

   +------------------------------------------------------------+
   |                SOFTWARE CONFIGURATION RESET                |
   |------------------------------------------------------------|
   |             Setting             |            E1            |
   |---------------------------------+--------------------------|
   |>>      |    Normal operation    |    Pins 2 & 3 closed     |
   |--------+------------------------+--------------------------|
   |        |         Reset          |    Pins 1 & 2 closed     |
   |------------------------------------------------------------|
   | Note:Many of the options are configured using the setup    |
   | utility provided with the card. To reset those             |
   | configurations to the factory defaults, move E1 to the     |
   | Reset position (pins 1 & 2 closed) and apply power for a   |
   | few seconds. Always make sure that you turn off the power  |
   | to the computer before you change any jumpers.             |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      CARD I/D NUMBER                       |
   |------------------------------------------------------------|
   |   Number    |    E2A     |    E2B    |   E2C    |   E2D    |
   |-------------+------------+-----------+----------+----------|
   |>>    |  1   |    Open    |   Open    |   Open   |  Closed  |
   |------+------+------------+-----------+----------+----------|
   |      |  2   |    Open    |   Open    |  Closed  |   Open   |
   |------+------+------------+-----------+----------+----------|
   |      |  3   |    Open    |  Closed   |   Open   |   Open   |
   |------+------+------------+-----------+----------+----------|
   |      |  4   |   Closed   |   Open    |   Open   |   Open   |
   |------------------------------------------------------------|
   |   Note:Up to four cards can be installed into a system at  |
   |   the same time. If more than one card is installed each   |
   |   one must have a seperate card I/D number.                |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    LINK INTEGRITY TEST                     |
   |------------------------------------------------------------|
   |          Setting           |              E3               |
   |----------------------------+-------------------------------|
   |>> |        Enabled         |       Pins 1 & 2 closed       |
   |---+------------------------+-------------------------------|
   |   |        Disabled        |       Pins 2 & 3 closed       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                FACTORY CONFIGURED SETTINGS                 |
   |------------------------------------------------------------|
   |            Jumper            |           Setting           |
   |------------------------------+-----------------------------|
   |             E5A              |            Open             |
   |------------------------------+-----------------------------|
   |             E5B              |            Open             |
   |------------------------------+-----------------------------|
   |             E5C              |           Closed            |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   |  LED   |  Color  |  Status  |          Condition           |
   |--------+---------+----------+------------------------------|
   |  LED1  |   Red   |    On    |  Card is being accessed by   |
   |        |         |          |        host computer         |
   |--------+---------+----------+------------------------------|
   |  LED1  |   Red   |   Off    |  Card is not being accessed  |
   |        |         |          |       by host computer       |
   |--------+---------+----------+------------------------------|
   |  LED2  |  Green  |    On    | Data is being transmitted or |
   |        |         |          |           received           |
   |--------+---------+----------+------------------------------|
   |  LED2  |  Green  |   Off    |      Data is not being       |
   |        |         |          |   transmitted or received    |
   |--------+---------+----------+------------------------------|
   |  LED3  |   Red   |    On    |  Receive wires are reversed  |
   |        |         |          |      and corrected for       |
   |--------+---------+----------+------------------------------|
   |  LED3  |   Red   |   Off    |       Normal operation       |
   |--------+---------+----------+------------------------------|
   |  LED4  |  Green  |    On    |  Network connection is good  |
   |--------+---------+----------+------------------------------|
   |  LED4  |  Green  |   Off    | Network connection is broken |
   |------------------------------------------------------------|
   | Note:If LED3 is lit the receive wires are reversed. The    |
   | card will automatically correct for this but the wires     |
   | should be repaired as soon as possible.                    |
   +------------------------------------------------------------+