CONNER PERIPHERALS, INC. ======================== CTL96G-S Device Type Internal Tape Drive Interface SCSI Format DDS-3 Sustained Transfer Rate 1,100KBPS 2,200KBPS (compressed) Size 5.25 in. full height View Bottom +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | |-------------------------------------------------+----------| | Serial port (pin-out and function unidentified) | CN1 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-------------------------------------+----------+-----------| |>> | MRS Mode disabled | SW1/S4 | On | |-----+-------------------------------+----------+-----------| | | MRS Mode enabled | SW1/S4 | Off | |-----+-------------------------------+----------+-----------| |>> | Parity check disabled | SW1/S5 | Off | |-----+-------------------------------+----------+-----------| | | Parity check enabled | SW1/S5 | On | |-----+-------------------------------+----------+-----------| |>> | Data compression enabled | SW1/S6 | Off | |-----+-------------------------------+----------+-----------| | | Data compression disabled | SW1/S6 | On | |-----+-------------------------------+----------+-----------| |>> | Factory configured - do not | SW1/S7 | Off | | | alter | | | |-----+-------------------------------+----------+-----------| |>> | Self-Test disabled | SW1/S8 | Off | |-----+-------------------------------+----------+-----------| | | Self-Test enabled | SW1/S8 | On | |------------------------------------------------------------| | Note: MRS (Media Recognition System) Mode enabled allows | | drive to detect DDS cartridges that support this feature. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DRIVE SELECT ID | |------------------------------------------------------------| | Drive ID | JP1/Pins 1 & 2 | JP1/Pins 3 & | JP1/Pins 5 & | | | | 4 | 6 | |------------+-----------------+--------------+--------------| |>> | 0 | Open | Open | Open | |------+-----+-----------------+--------------+--------------| | | 1 | Closed | Open | Open | |------+-----+-----------------+--------------+--------------| | | 2 | Open | Closed | Open | |------+-----+-----------------+--------------+--------------| | | 3 | Closed | Closed | Open | |------+-----+-----------------+--------------+--------------| | | 4 | Open | Open | Closed | |------+-----+-----------------+--------------+--------------| | | 5 | Closed | Open | Closed | |------+-----+-----------------+--------------+--------------| | | 6 | Open | Closed | Closed | |------+-----+-----------------+--------------+--------------| | | 7 | Closed | Closed | Closed | |------------------------------------------------------------| | Note: If using Pins 1-6 of JP1 for SCSI ID selection, S1, | | S2, and S3 of SW1 must be set to the 'Off' position. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DRIVE SELECT ID | |------------------------------------------------------------| | Drive ID | SW1/S1 | SW1/S2 | SW1/S3 | |-----------------+------------------+-----------+-----------| |>> | 0 | Off | Off | Off | |--------+--------+------------------+-----------+-----------| | | 1 | On | Off | Off | |--------+--------+------------------+-----------+-----------| | | 2 | Off | On | Off | |--------+--------+------------------+-----------+-----------| | | 3 | On | On | Off | |--------+--------+------------------+-----------+-----------| | | 4 | Off | Off | On | |--------+--------+------------------+-----------+-----------| | | 5 | On | Off | On | |--------+--------+------------------+-----------+-----------| | | 6 | Off | On | On | |--------+--------+------------------+-----------+-----------| | | 7 | On | On | On | |------------------------------------------------------------| | Note: If using S1, S2, and S3 of SW1 for SCSI ID | | selection, Pins 1-6 of JP1 must be set to the 'Open' | | position. | +------------------------------------------------------------+ +------------------------------------------------------------+ | TERMINATION POWER SELECTION | |------------------------------------------------------------| | Setting | JP2 | |-------------------------------------------------+----------| |>> | TERMPWR supplied by drive | Closed | |---+---------------------------------------------+----------| | | TERMPWR supplied by SCSI interface to drive | Open | +------------------------------------------------------------+ +------------------------------------------------------------+ | MANUFACTURERS RECOMMENDED MEDIA | |------------------------------------------------------------| | Tape | Capacity Without | Capacity With | | | Compression | Compression | |--------------------+-------------------+-------------------| | 90 meter DDS-DC | 8.0GB (4 Tapes) | 16.0GB (4 Tapes) | | DAT cartridge | | | |--------------------+-------------------+-------------------| | 120 meter DDS-2 | 16.0GB (4 Tapes) | 32.0GB (4 Tapes) | | DAT cartridge | | | |--------------------+-------------------+-------------------| | 125 meter DDS-3 | 48.0GB (4 Tapes) | 96.0GB (4 Tapes) | | DAT cartridge | | | |------------------------------------------------------------| | Note: Above capacities are achieved by loading 4 | | cartridges only. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+--------+--------+-----------------------------------| | LED1 | Green | On | Cartridge is inserted and does | | | | | not generate excessive errors | |------+--------+--------+-----------------------------------| | LED1 | Green | Slow | Cartridge is inserted but | | | | Flash | generates excessive errors | | | | | (cleaning may be required) | |------+--------+--------+-----------------------------------| | LED1 | Green | Fast | Drive could not write to tape | | | | Flash | correctly - cleaning required | |------+--------+--------+-----------------------------------| | LED1 | Green | Off | Cartridge not loaded | |------+--------+--------+-----------------------------------| | LED2 | Amber | On | Drive is reading or writing to | | | | | the tape | |------+--------+--------+-----------------------------------| | LED2 | Amber | Fast | A hardware fault occurred or | | | | Flash | moisture detected on tape | |------+--------+--------+-----------------------------------| | LED2 | Amber | Off | Drive is not reading or writing | | | | | to the tape | |------+--------+--------+-----------------------------------| | LED3 | Green | On | A data compression or | | | | | decompression operation is in | | | | | progress on the current cartridge | |------+--------+--------+-----------------------------------| | LED3 | Green | Off | A data compression or | | | | | decompression operation is not in | | | | | progress on the current cartridge | |------+--------+--------+-----------------------------------| | LED4 | Green | On | A write-protected cartridge is | | | | | currently loaded | |------+--------+--------+-----------------------------------| | LED4 | Green | Off | A write-protected cartridge is | | | | | not currently loaded | |------------------------------------------------------------| | Note: If LED1 flashes slowly during flash of LED2, a | | prerecorded audio cartridge is inserted and is being | | played automatically. Use DDS DAT cleaning cartridges | | only. | +------------------------------------------------------------+